|
|
|
|
Joined: Mar 2004
Posts: 488
Member
|
|
Member
Joined: Mar 2004
Posts: 488 |
I installed a stratagy 2 port in a DK 40. Is there something in programming to make the voice mail answer quicker, main greetings and mail boxes I went into telephone system configuration, then edit system intergation patterns. I adjusted the timer from 20 to 10. It didn't seem to help. I was going to use SMDI but there is issues with the software in the Ksu. Thanks for your help. This is a great place to learn lots. Thanks for your in put.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2005
Posts: 12
Member
|
|
Member
Joined: May 2005
Posts: 12 |
At the bottom of Voice Mail Config. there will be entries for ext. length values. By default they are set at 8. Change them to the actual length of your ext. for the digits that your mailboxes start with. Don't change 9 or 4 to less than 3 or you will mess up your 900 and 411 mailboxes.
|
|
|
|
|
Joined: Jun 2005
Posts: 27
Member
|
|
Member
Joined: Jun 2005
Posts: 27 |
DTMF intergration is slower for sure, I personally find that the IVP8 is even slower then the DK. But SMDI would make a huge difference, I have always tweaked the same setting as you all have.... so no new things there, what I can add to the list of tweaks is placing an "H" behind the extension in the extension field, this will place an unsupervised transfer, it is faster.
Good Luck.
Of all the things I've lost I miss my mind the most -- Ozzy Osbourne
|
|
|
|
|
Joined: Sep 2004
Posts: 2,017
Former Moderator-Toshiba, Request an Installer
|
|
Former Moderator-Toshiba, Request an Installer
Joined: Sep 2004
Posts: 2,017 |
I have had conversations with Toshiba about this. They said its the nature of the beast. The IVP8 using DTMF is very slow to answer. Use SMDI whenever possible. ------------------ Toshiba Technical Support at: fingerlakestelecom.net
|
|
|
|
|
Joined: Mar 2001
Posts: 581
Member
|
|
Member
Joined: Mar 2001
Posts: 581 |
i always use unsupervised transfer with stratagy.
m
|
|
|
|
|
Joined: Nov 2004
Posts: 18
Member
|
|
Member
Joined: Nov 2004
Posts: 18 |
I have a 424 v4.3 and a Stratagy DK and want to set up SDMI . I have read the manual but am missing something and can't seem to get it to work. Can anyone point me in the right direction.
|
|
|
|
|
Joined: Sep 2004
Posts: 2,017
Former Moderator-Toshiba, Request an Installer
|
|
Former Moderator-Toshiba, Request an Installer
Joined: Sep 2004
Posts: 2,017 |
The first thing to do is run Plug and Play for DK424/SMDI. All user mailboses will be erased and default mb's will be set up for extn 200-231. Any single digit routing will also be gone. ------------------ Toshiba Technical Support at: fingerlakestelecom.net
|
|
|
|
|
Joined: Mar 2004
Posts: 488
Member
|
|
Member
Joined: Mar 2004
Posts: 488 |
The programming on your telephone system is very important.Connect your laptop to the KSU, the SMDI port, open hyperteminal put a RSTU card where your vm is going and call the VM. That will make sure that the correct digits are going to your vm.The first SMDI connection takes some work. Keep your notes.Got a flat spot on my forehead from the first one Good luck
|
|
|
|
|
Joined: Nov 2004
Posts: 18
Member
|
|
Member
Joined: Nov 2004
Posts: 18 |
Is there any other way than plug and play and loose all the mail boxes?
|
|
|
|
Forums84
Topics94,518
Posts639,980
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
423
guests, and
25
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
