|
|
Joined: Sep 2005
Posts: 48
Member
|
OP
Member
Joined: Sep 2005
Posts: 48 |
hi!
had a quick question - is there a way to retrieve caller id for a message that is (n) hours or days old, if the message still exists in the iES32?
it displays the cid for internal messages, but these vm all say FRM:UNKNOWN, and we're trying to track a customer message (where the guy indecipherably mumbled his telephone number).
thanks in advance!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
At this point, no. The ies did not record the caller id number because it wasn't given it by the CTX/CIX. Either you don't have caller id service or equipment or you need to enable caller id/ANI to pass through the SMDI.
|
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
When I get an UNKNOWN on my 3014 screen, it is because the caller id is blocked. To see if that is the same on the iES32, make one call from a cell phone that does not have caller ID blocked and one more call where you dial *67 and then the number.
If the first one shows the number and the second one shows UNKNOWN you have confirmed that your caller id is coming in and is being processed by the toshie and that the caller's number was blocked.
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
|
Joined: Sep 2005
Posts: 48
Member
|
|
OP
Member
Joined: Sep 2005
Posts: 48 |
bunny: i don't think it was blocked (although i could be wrong), but all vm's act this way; you can get the CID "live", but on vm playback it always says "unknown" (unless the vm came from someone else in the office).
phonemeister: we have a RCIU/RCIS that, as i mentioned, works fine for "live" calls. i looked in the install guide, but it didn't really show me anything that would tell me if the integration codes currently present would handle the CID. i saw mention of an option "play_caller_id" in the system options, but no such option exists (in my system options).
is there anything on the CIX that needs to be done or is it all on the iES side? *digs about for integration codes reference*
|
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
|
|
|
|
|
Joined: Sep 2005
Posts: 48
Member
|
|
OP
Member
Joined: Sep 2005
Posts: 48 |
a-ha, i was looking down in the trunk DIT settings. thank you!!
|
|
|
|
Forums84
Topics94,299
Posts638,873
Members49,770
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (nortelvoip),
95
guests, and
313
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
