sundance-communications.com/forum Forums TDM Business Telephone Systems Toshiba Telephones & Systems DK40i DTMF to VM help

ok seems like I need an overview of how vm works on a toshiba I am trying very hard to learn this stuff so I hope you will excuse my ignorance.

I started with a box of parts and have a working phone system (mainly)
When a call goes to a station that is busy, it should go to vm or when it is not answered. I dont want to have to have each person set a cfbna on each phone.

The back end stuff seems to be working.. I basically setup program 83, 86, and 89 to ring the vm group after 24 sec, this seems to work but perhaps someone can tell me the right way. I set the VM ID on each phone, the MW seems to work. DTMF digits are sent properly and the system asks for a pw, etc..

background:
DK40i, Aleen VME4000, KSTU2, dtmf card, slot 00=92 - i also tried 98 with same result), (prog 31=5,6,16,17,18,20)- I also tried 15,19 same result (13=008) <VM PORTS ARE 008-011> (40=DH900 hunt 01=008,02=009,03=010,04=011)

thanks in advance

P.S. Im willing to spend some $ for a teacher to help me finish if anyone is interested. Garden Grove, CA email me through the board.

There is no choice but CFBNA for a call to go to a vm box if you want busy or no answer forwarding.

I think you have it as good as you need/have.

If you are flexible on time, I am supposed to be going to to Irvine on Wednesday the 15th and could stop by on the way back.

does the CFBNA need to be done on each phone or is there a program for this?

thanks in advance

Set it on each phone.....