Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
DK280 moving electronic to digital
#185800 07/19/06 12:37 AM
Joined: Jun 2005
Posts: 14
Boyan Offline OP
Member
OP Offline
Member
Joined: Jun 2005
Posts: 14
Hi

I am pretty new at DK280 - I need to move electronic to digital station. Auto move will NOT work in this scenario. How do I go by doing it? The electronic ext. # and all settings must be preserved when moving to digital. I just want to slowly kill all electronic cards but cant seem to find a way to move ext. one by one and keep their config

Thanks
~B

Toshiba Telephones and Equipment
Re: DK280 moving electronic to digital
#185801 07/19/06 12:43 AM
Joined: Mar 2001
Posts: 3,869
Member
****
Offline
Member
****
Joined: Mar 2001
Posts: 3,869
You would replace a PEKU with 8 electronic extension with a PDKU of 8 digital extensions.

Power down, remove the PEKU, insert the PDKU in the same slot, power up. In program 03 change the slot to 61, 62 or 63 as indicated and you are up.

All config is there.


THE Bracha, old blond specialist in Rube Goldberg solutions.
Re: DK280 moving electronic to digital
#185802 07/19/06 03:00 AM
Joined: Apr 2004
Posts: 4,991
Member
*****
Offline
Member
*****
Joined: Apr 2004
Posts: 4,991
Following Bunnies advice above you will

be dealing with 8 extensions at a time.

Suggestion would be to call in local tech

and convert 8 at a time.

Re: DK280 moving electronic to digital
#185803 07/19/06 09:52 AM
Joined: Apr 2005
Posts: 2,379
Member
*****
Offline
Member
*****
Joined: Apr 2005
Posts: 2,379
Shouldn't you make changes in program 03 than power down and swap out the cards?

Dan S


We get old too soon, smart too late
Re: DK280 moving electronic to digital
#185804 07/19/06 12:42 PM
Joined: Mar 2001
Posts: 3,869
Member
****
Offline
Member
****
Joined: Mar 2001
Posts: 3,869
I don't think it would matter changing the slot before or after when going PEKU to PDKU. I've done several in a 424 until all the electronic phones were gone and didn't lose any programming.

And if you find that none of the phones work, press the three white circuit breakers on the power supply. I have had situations where I swapped the card, reprogrammed in 03 and nothing worked until I got the bright idea to push the circit breakers on the power supply in that cabinet and all 8 stations came up.


THE Bracha, old blond specialist in Rube Goldberg solutions.
Re: DK280 moving electronic to digital
#185805 07/21/06 11:02 AM
Joined: Jun 2005
Posts: 139
Member
Offline
Member
Joined: Jun 2005
Posts: 139
AFTER YOU RUN PROGRAM 3 YOU MUST RECYCLE POWER AGAIN IN ORDER FOR THE SYSTEM TO RECOGNIZE THE CARD. PROGRAM 03 YOU MUST ALWAYS REBOOT AFTER CHANGES ARE MADE. YOU CAN ALSO RUN 91-2 TO RESET SYSTEM.

Re: DK280 moving electronic to digital
#185806 07/22/06 02:51 AM
Joined: Jun 2006
Posts: 126
Member
Offline
Member
Joined: Jun 2006
Posts: 126
Yep, I always used Bunnie's method. Auto relocation only works if the extensions are of the same type, i.e. DKT to DKT, EKT to EKT.

And should you power on without a card in that empty slot, the system will "move forward" all the extensions by at least 8 ports wink


Moderated by  Carlos#1, phonemeister 

Link Copied to Clipboard
Forum Search
Most Recent 5 Post
Suttle Apparatus Acquisition.
by dexman - 07/11/20 03:59 AM
Headset in-use relay
by SST - 07/08/20 06:33 PM
Partner ACS AA
by mtncomm1 - 07/08/20 04:18 PM
Samsung SVMI20i
by crazy canuck - 07/08/20 03:40 PM
Help with Electra Elite IPK
by ECI Tech - 07/08/20 11:56 AM
Who's Online Now
37 members (dexman, Yoda, Carl Navarro, ffej010, RATHER BE FISHING, Mercenary Roadie, hitechcomm, hbiss, EV607797, nonameyet, newtecky, BobRobert, nortelvoip, justbill, mbhydro, usedphones, juno, Silversam, JBean3329, Marko65, Ruben, Rok1215, Arthur P. Bloom, Touch Tone Tommy, crazy canuck, Curlycord, OBT, KRRath, Memphisribs, mtncomm1, Bob-o, Joel J., Professor Shadow, jacktel, conxtel, Meyery2k, mike b), 320 guests, and 57 robots.
Key: Admin, Global Mod, Mod
Popular Topics (Views)
Forum Statistics
Forums94
Topics93,806
Posts636,323
Members49,310
Most Online5,661
May 23rd, 2018
Today's Birthdays
94astro, Jasonrod11, Joefish711, John McFerren, Timo
Newest Members
StevCom, DaleG, jlspeck, Real Estating, ForestHillChurch
49310 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
EMP & Lightning Home Surge Protection
EMP - Click Here!
Top Posters (30 Days)
dexman 21
dans 10
Bluewater Sailing
https://www.patreon.com/bePatron?u=5256033
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2020
Trusted Partners