|
|
|
|
Joined: Sep 2006
Posts: 2
Member
|
|
Member
Joined: Sep 2006
Posts: 2 |
I believe I have a serial connection problem on a 424. About 3 weeks ago I uploaded some changes. Everything has worked okay since. Now I need to make changes again. I apparently am not talking to the PIOUS2 card's top connector. Using the same cable as before.
After I enter the DK Code a window pops open indicating a serial connection problem. I go OPTIONS and confirm the settings are okay there. The screen states that there are three places that these settings must be the set the same. Cannot locate the other two places to confirm. Am I on the right track? Can someone help? Thanks.
WCS Tech
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
|
Member
Joined: Apr 2004
Posts: 4,991 |
Mine always takes 2 times b4 connecting
Is the pious set to tty and not modem
and 1200 ?
In the comm section of the dk is parity even
data bits 7
stop bits 1
Are you using the 6 pin sta cord ?
If your using your pious and not an installed one are u in the correct slot?
|
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
Mine usually takes entering the passcode twice before connecting and last night it opened up on the first pass every time. Go figure that scenario.
On some of these squirrly things, I restart and it works.
You can always enter through the phone programming at port 005, you are not locked out of programming ability without the dk admin, it is just handy.
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
Forums84
Topics94,518
Posts639,976
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
253
guests, and
40
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
