|
|
Joined: Nov 2005
Posts: 33
Member
|
|
Member
Joined: Nov 2005
Posts: 33 |
I have a customer with a Toshiba Dk40i. It is configured with main cabinet (4X8 with 4 port analog card with DTMF receiver). Expansion cabinet is configured 1st slot KCDU 2nd slot PDKU 3rd slot RDSU c/w RSTS on RDSU.
I have programmed Code 27 in program 03 for the RDSU in slot 17 of expansion cabinet.
Am I missing something painfully obvious here, do I need to make any additional program changes or should I be looking at a card fault, and yes I do not have a spare one, What pairs should the analog ports be on the amphenol cable. (I have inherited this system and is on a patch panel.)
Any suggestions would help
Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Nov 2005
Posts: 645
Member
|
|
Member
Joined: Nov 2005
Posts: 645 |
If I remember right, the RDSU is set to have teh dirst 4 ports a Digital and the last 2 as analog, the RSTS will give you 4 more digital ports and then 2 more analog ports. The other thing to verify is if you have the card in slot 17. In teh expansion cabinet, the bottom right is 15, the bottom left is 16, the top right is 18 and the top left is 17.
Hopefully it isn't too late and I haven't screwed this up!
|
|
|
|
|
Joined: Nov 2005
Posts: 33
Member
|
|
Member
Joined: Nov 2005
Posts: 33 |
I programmed and moved the card in both positions in the upper expansion cabinet. Did not make any difference. If I put my toner on the positions I think the ports should be it brings up a light. If I plug my toner on a digital port it does bring up a light on my toner. But if I plug in a telephone in that position, the telephone acts like the card slot is not programmed (ie, if you plug in a digital set on one of the digital ports if you press any buttons it beeps, but does not show any display or button activity)
|
|
|
|
|
Joined: Mar 2004
Posts: 488
Member
|
|
Member
Joined: Mar 2004
Posts: 488 |
It should wire out the same as any other card. It will start with the blue white and every other pair down the line for your eight ccts. You may have another problem that you may be over your port count. I think that the total port count is 28. You may have to remove the KSTU to make the RSTU work.
|
|
|
|
|
Joined: Jan 2006
Posts: 2,266 Likes: 1
Member
|
|
Member
Joined: Jan 2006
Posts: 2,266 Likes: 1 |
did you cycle the power after running program 03??
|
|
|
|
|
Joined: Jan 2006
Posts: 2,266 Likes: 1
Member
|
|
Member
Joined: Jan 2006
Posts: 2,266 Likes: 1 |
The analog's are on pins 1,2=slt#1 /5,6=slt#2 /9,10=slt#3 / 13,14=slt#4
the digital are on pins 17,18=digital /21,22=digital ,and so on.
|
|
|
|
|
Joined: Sep 2004
Posts: 1,436
Member
|
|
Member
Joined: Sep 2004
Posts: 1,436 |
Wayne is right, the digital ports on the RDSU put it over the limit of 28 ports.
Joe
---
No trees were harmed as a result of this posting; however, many electrons were severely inconvenienced.
|
|
|
|
|
Joined: Nov 2005
Posts: 33
Member
|
|
Member
Joined: Nov 2005
Posts: 33 |
Thanks Amy , phoneguywayne ,Steve Mull and junkman.
Thank you for the information re 28 ports, I will go to site to see if I can move, eliminate some cards.
Greg
|
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
What? There is no port limit on a DK40i that I have heard of. Over 32 on a CTX/CIX maybe but not a DK40i?
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
|
Joined: Oct 2006
Posts: 114
Member
|
|
Member
Joined: Oct 2006
Posts: 114 |
Bunnie,
I always thought the 40 stood for 28 port's and 12 co's . Please correct me if I'm wrong because this would be a good piece of information to know when troubleshooting wierd issues.
The Rat
|
|
|
|
Forums84
Topics94,532
Posts640,045
Members49,854
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
