sundance-communications.com/forum Forums TDM Business Telephone Systems Toshiba Telephones & Systems calling # ID on cix100 w/pri

Hm, what about doing a Group CO (GCO) and only assigning it to my phone? Would that work to pick up my phone, hit the GCO button, and dial away, having the tosh send the caller ID I program for the GCO?

Thats a possibility........Let me work on it...

I prob could have figured that a phantom would not work if I took a second to think about.

I'm a little fuzzy on how a Call-by-Call would work. I know the basic info, and that Toshiba's guide shows how to use it to present different calling ID numbers in a multi-tenant application where the same PRI would use multiple OLGs to show the different calling number.

Hmm, does that mean that you can create access codes to go over different OLGs on the same PRI and show a different Calling Numbers?

I was at an account that ordered a 1/2 dozen POTS lines so they can have Caller ID blocked on some occational calls.

That's what I was getting at. Just did that same scenario last week. Worked out fine.

I suppose you can. I would just put pool or gco keys on the phone.

Thanks for all the info!

It leads me to ask, what are the normal purposes of using GCO keys? Is that something that would be used on analog lines usually?

GCO has a field called "index" that corresponds to the ISDN (PRI) B-channel. So u can select/monitor all 30 channels (or 23, where u guys are at) on the flexible buttons.

I use GCO for ISDN and PLK for analog. But it works the other way around too.

Thanks alfee for the info, where would I find the GCO setup in e-manager? not gonna change anything now, want to see what it looks like though. thanks.

You can select GCO when assign keys to the phones. instead of CO line or Pool key youould seelct GCO, selec the index you want and the ringing etc.

Thanks amy!