Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#190834 09/12/07 01:35 PM
Joined: Feb 2007
Posts: 1,314
RRino Offline OP
Member
OP Offline
Member
Joined: Feb 2007
Posts: 1,314
Im running into an issue with a 2-node(node 10 and 11) IP QSIG using LIPU and centralized VM(iES32)in node 10. I have the dial 0 out of vm pointed to PhDN 500 which is on several ext's on node 10 ringing some immediately and a few others on a delay. I want to have that do the same thing on node 11 however when I try to assign PhDN 500 on any ext on node 11, I get a "DN conflict" error. I have downloaded and uploaded the network DN tables to both nodes and made sure that 500 was one of them. Can this be done and I am missing something or is it impossible? Or is there a different way to accomplish this. FYI, everything else works as far as QSIG goes, DSS lights, intercom without adding the node ID, LCR, etc. I also cant create a MCG in node 10 and include ext's from node 11. Tried with and without node ID's.

GA
#190835 09/12/07 02:22 PM
Joined: Jul 2006
Posts: 728
Member
Offline
Member
Joined: Jul 2006
Posts: 728
I dont think you can have PHDN 500 show up both places...

The systems are not integrated like that.

The nodes cannot "share" extensions....

#190836 09/12/07 02:26 PM
Joined: Jun 2005
Posts: 2,580
Member
Online Content
Member
Joined: Jun 2005
Posts: 2,580
You can not ring 2 phones at 2 sites across a Qsig at the same time, using MCG or phantoms. It would not let you create a PhDN of 500 if it already exist in the Network DN table. The PhDNs don't work accross qsig.

Not everything works perfectly across a QSig. They are really 2 switchs connected, rather then 2 parts of 1 big switch. Just try parking and calls accross qsig.

#190837 09/12/07 02:56 PM
Joined: Feb 2007
Posts: 1,314
RRino Offline OP
Member
OP Offline
Member
Joined: Feb 2007
Posts: 1,314
Thats kinda what I thought just never tried it until now. frown


Moderated by  Carlos#1, phonemeister 

Link Copied to Clipboard
Advertising Sponsor
Most Recent 5 Post
Old Equipment Plan
by MarkAtLMFJ - 03/05/21 04:41 PM
OS 7400 OAS
by John807 - 03/05/21 04:21 PM
Pair location
by backenhiemer - 03/05/21 10:44 AM
Coaxial Cable
by dexman - 03/04/21 03:53 AM
Netlink or CCIS
by Yoda - 03/02/21 02:32 PM
Popular Topics (Views)
Forum Statistics
Forums95
Topics94,285
Posts639,096
Members49,425
Most Online5,661
May 23rd, 2018
Today's Birthdays
ciccotelli, esinoob, Michael M
Newest Members
Sam Juniper, B Ledford, Jonie4, James Wright, TechnoloJay
49,425 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
EMP & Lightning Home Surge Protection
EMP - Click Here!
Top Posters (30 Days)
dexman 28
Ruben 24
pvj 11
Linked Banner to your Product or Website
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Who's Online Now
23 members (sundance, EV607797, backenhiemer, newtecky, Coral Tech, hbiss, nortelvoip, justbill, dexman, Bob3470, kjwiewall, jeffmoss26, PortlandTech, Touch Tone Tommy, Mercenary Roadie, Professor Shadow, nfcphoneman, JBean3329, Ruben, hitechcomm, RM SYSTEMS, nameless, Memphisribs), 258 guests, and 40 robots.
Key: Admin, Global Mod, Mod
Custom Island 58
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2021
Trusted Partners