|
|
|
|
Joined: Oct 2004
Posts: 97
Member
|
|
Member
Joined: Oct 2004
Posts: 97 |
Trying to set line appearances (DK280). Line is presently on (2) sets. Going into program #39 and assigning it on (2) additional sets. Programming says lines are on but they don't appear. Was able to delete the line from one of the sets and add it back so I know I'm doing the right thing. What's the issue?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2004
Posts: 2,017
Former Moderator-Toshiba, Request an Installer
|
|
Former Moderator-Toshiba, Request an Installer
Joined: Sep 2004
Posts: 2,017 |
Check prog.40 station port must have access to that line - turn LED on. Also prog.41 station port must have the ability to directly access that line - turn LED off.
Let me know.
|
|
|
|
|
Joined: Oct 2004
Posts: 97
Member
|
|
Member
Joined: Oct 2004
Posts: 97 |
I'll check tomorrow and let you know...thanks
|
|
|
|
|
Joined: Oct 2004
Posts: 97
Member
|
|
Member
Joined: Oct 2004
Posts: 97 |
program 40 it was. Problem was I was trying to program from a 10 button and the co line was on buttons 11-20.....live and learn.
|
|
|
|
|
Joined: Sep 2004
Posts: 2,017
Former Moderator-Toshiba, Request an Installer
|
|
Former Moderator-Toshiba, Request an Installer
Joined: Sep 2004
Posts: 2,017 |
|
|
|
|
Forums84
Topics94,512
Posts639,934
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
189
guests, and
33
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
