sundance-communications.com/forum Forums TDM Business Telephone Systems Toshiba Telephones & Systems LCR for OLG2?

I have a system with a couple 1MBs and 2 BRI circuits. They're currently using the 1mbs and I'm testing with the analog circuits (centralized VM over qsig and I'm testing how the analog + qsig will work). The BRIs are OLG1 and the 1MBs are OLG2.

Goal: 1 phone that uses the analog for outgoing calls, and I didn't want to force that phone to use a CO line (though I may need to, and it's just for testing...)

I just reviewed some toshiba docs on setting up LCR. Currently there are 2 LCRs - one that's setup for local calls, and a second for LD (it looks for a '1'). I tried to setup route plan 3, that doesn't look for any specific number, uses OLG 2, defaulot digit modification (DM 1, which is no digit modification), and setup a schedule for weekdays, Time zone 1, LCR group 2 to use route plan 3.

That didn't work. So I changed route plan 3 to look for 'X' (all numbers). Suddenly it works great!

But then local calls stopped working on the other phones. LD worked fine.

I get rid of the 'X' for route plan 3 and local calls on the other phones work.

Moved to installer category.