|
|
Joined: May 2004
Posts: 336
Member
|
|
Member
Joined: May 2004
Posts: 336 |
Hi all,
I picked up a refurb ctx100 to fiddle with in the shop to get familiar with programming spare parts etc after I picked up a new customer that has the same switch.
I have the Emanager program and I "think" I set up everything correctly in the equipment editor with the default IP & password, crossover cable etc. but when I try to log in I get no response from system but I can ping it from the command prompt, so I'm starting to wonder if the password wasn't defaulted, is there a way to default the system through hardware by either pulling the battery or something.
Also, I was able to log into the new customer months ago and I may have to do some programming there in the near future but I would like to brush up on he programming before I go out there.
Any suggestions would be appreciated.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2007
Posts: 627
Member
|
|
Member
Joined: Jun 2007
Posts: 627 |
Yes pulling the battery strap will default the CPU. If you have a SM card in the slot with a valid backup on it, it will load that backup upon first boot.
|
|
|
|
|
Joined: May 2008
Posts: 34
Member
|
|
Member
Joined: May 2008
Posts: 34 |
ON CTX PLATFORMS YOU CAN USE WINCTX FOR PROGRAMMING,AND ON CIX PLATFORMS YOU CAN USE EMANAGER FOR PROGRAMMING.I AM NOT SURE WHAT SOFTWARE RELEASE IN THE CUTOFF BETWEEN THE TWO
CCEJIM
|
|
|
|
|
Joined: May 2004
Posts: 336
Member
|
|
Member
Joined: May 2004
Posts: 336 |
Originally posted by mj_wald:
Yes pulling the battery strap will default the CPU. If you have a SM card in the slot with a valid backup on it, it will load that backup upon first boot. Thanks, I'll try booting it up without the SM card and see what happens
|
|
|
|
|
Joined: Jan 2006
Posts: 340
Member
|
|
Member
Joined: Jan 2006
Posts: 340 |
There is no cut-off. You can use Emanager for CTX and CIX.
Shawn
Absolute Communications, Inc.
|
|
|
|
|
Joined: Dec 2007
Posts: 2,033
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Dec 2007
Posts: 2,033 |
Originally posted by CCEGROUP:
ON CTX PLATFORMS YOU CAN USE WINCTX FOR PROGRAMMING,AND ON CIX PLATFORMS YOU CAN USE EMANAGER FOR PROGRAMMING.I AM NOT SURE WHAT SOFTWARE RELEASE IN THE CUTOFF BETWEEN THE TWO
CCEJIM Shawn is correct, you can use eMnager as well as Network eManager on CTX and CIX platforms, as there is no cutoff.
- Tony Ohio Data LLC Phone systems, data networks, firewalls and servers in Central Ohio. Some people aren't used to an environment where excellence is expected.
|
|
|
|
|
Joined: Jun 2005
Posts: 2,723 Likes: 7
Member
|
|
Member
Joined: Jun 2005
Posts: 2,723 Likes: 7 |
Ver 3.xx is when they jumped from CTX Winadmin to eManager.
I have seen people use WinAdmin on 3.10 systems, but get occational errors. EManager was design to be backwards compatable, but I have heard stories of it being a little buggy on real old versions, like 1.02.
If you pull the baterry and reload the database from the backup (SM or SD card) then I think it would likely restore the passcodes too. If the backup card is left out, then it will default and install the cards that are plugged into the system.
|
|
|
|
|
Joined: Oct 2007
Posts: 15
Member
|
|
Member
Joined: Oct 2007
Posts: 15 |
In the equipment editor you set the I.P. address and community of the CIX you are logging into. Then in classes set up you select a user and assign that equipment to the user. Then you can select the system to log into. The "password" of the CIX is ****.
Edited:
A little too much info for the public. Besides, he's not asking for the p/w.
|
|
|
|
Forums84
Topics94,518
Posts639,974
Members49,849
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
