|
|
Joined: Jul 2008
Posts: 4
Member
|
|
Member
Joined: Jul 2008
Posts: 4 |
We have many of the same phones in a small vicinity and wish for one phone to stand out by changing the ringer it has when people call.
We are using Toshiba DKT2010 SD phones and Toshiba Strata DK280 as our Call Distribution and Management System.
I was trying to find a manual that might tell me easy steps to take but so far I have been unsuccessful.
Anyone know how to change the ringer on these phones in any other manner than turning the volume down?
Thanks for any information you can provide.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2006
Posts: 2,266 Likes: 1
Member
|
|
Member
Joined: Jan 2006
Posts: 2,266 Likes: 1 |
program 80 will change the ring tone , but only on CO line calls
|
|
|
|
|
Joined: Jul 2008
Posts: 4
Member
|
|
Member
Joined: Jul 2008
Posts: 4 |
Thank you for the information.
I have just taken over the phone system at work so I'm new to terms. Could you tell me what CO stands for, please?
I know how to get into program 80 but I don't know the steps to take after that either.
|
|
|
|
|
Joined: Dec 2007
Posts: 2,033
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Dec 2007
Posts: 2,033 |
dtafl09, Welcome to the board! You will be best served by clicking the " Manuals " link at the top of the page, as the information you are requesting goes beyond the scope of the open forum. Thanks, Tony
- Tony Ohio Data LLC Phone systems, data networks, firewalls and servers in Central Ohio. Some people aren't used to an environment where excellence is expected.
|
|
|
|
|
Joined: Jul 2008
Posts: 4
Member
|
|
Member
Joined: Jul 2008
Posts: 4 |
I checked in there first and couldn't find anything that could tell me how to change the ringer... I can't even find a manual that will cover this..
|
|
|
|
|
Joined: Sep 2004
Posts: 2,017
Former Moderator-Toshiba, Request an Installer
|
|
Former Moderator-Toshiba, Request an Installer
Joined: Sep 2004
Posts: 2,017 |
The DKT User Guide will tell you how to change the ring tone on each phone. As Steve said, the ring tone only applys to intercom calls, Not CO calls.
A "CO" call is a ringing outside line, ie: Line 1 or Line 2, etc. You cannot change the tones between ringing lines.
Program 80 will determine what line rings on which phone.
|
|
|
|
|
Joined: Jul 2008
Posts: 4
Member
|
|
Member
Joined: Jul 2008
Posts: 4 |
So, if we wanted to change the ring tone for an incoming call on a particular phone, then this is possible, correct?
Is there a programming manual that tells you what to do when you get into Program 80? I looked up the DKT User guide and it didn't help.
Thank you.
|
|
|
|
|
Joined: Feb 2007
Posts: 18
Member
|
|
Member
Joined: Feb 2007
Posts: 18 |
within emanager how do i find program 80?
|
|
|
|
|
Joined: Mar 2005
Posts: 406
Member
|
|
Member
Joined: Mar 2005
Posts: 406 |
eManager is used to program the CTX/CIX systems and there is no Program 80, the system discussed here is a DK 280. You can edit tones in the Key programming of the eManager
|
|
|
|
Forums84
Topics94,522
Posts639,996
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
269
guests, and
44
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
