sundance-communications.com/forum Forums General General Telephone & Systems Information DSC Communique

I am a Home Automation guy and have a client with a DSC Communique KSU in their home. The unit has Music on Hold. I am unable to find any documentation on how to contro lthe MOH. Any help is appreciated. A link to manuals or the codes to change the radio station.

I doubt that you find anything on that thing. Just look what Google turns up. An unknown phone system made by an alarm equipment company. Their site sends you to some kind of search engine when you click on the documentation link. Good luck.

Best bet is to rip it out.

-Hal

On one of the links it says something about an " RCA input-- connect audio equipment for an external source of system background music and music on hold"

So there must be a radio or something hooked up to that. Just unplug it to make the music stop---or change the station on the radio, or change the CD--etc, etc.

I saw that too and was going to make the same comment. Kinda doubtful anybody would make a KSU with a radio tuner built in but who knows with that.

-Hal

Thank You for the advice. Ist seems like DSC is out of the phone business and their manuals are like rare books. From what I did find there seems to be a Radio Card in the KSU. I've checked for an input from external sources. Even changed the station. No Luck. Any help or links tothe manuals is appreciated.

I found this info if it helps PM sent

Background Music, Music on Hold, Alarm Clock Music

Your Communiqué system can provide background music, music on hold,or alarm clock music. Ask your system administrator if your system has
these optional features, and if your telephone has access to these features.
Background
Music
Background music can be heard at your Communiqué telephone when it is
not being used.
To turn background music ON, press .
To turn background music OFF, press again.
Radio Station
Presets
If you have the optional Communiqué radio tuner connected to your
system, you may program up to 8 radio stations of your choice.
1. Press to turn background music ON.
2. Press .
à The 8 Line keys and the Station keys 10 to 12 will be lit. The Line keys
represent the 8 programmed radio station locations and the Station 12
key is the memory programming key. The display reads, for example
87.9FM A=AM…Vol=SEL HF=Done.
3. Tune the Communiqué to the radio station you wish to save using the
and keys. To switch to AM radio, press . To switch to FM
radio, press .
4. Press the Station 12 key.
à The Station 12 key will flash slowly and the display reads, for example,
94.1FM A=AM…Set Memory=L1-L8.
5. Press a Line key to save the radio station.
6. Repeat steps 3 through 5 until all 8 radio station locations are programmed.
7. When finished, press .
NOTE: The Communiqué system can play only one radio station at a time.
Once a station is selected, it will be the only station available at all Communiqué
telephones.