|
|
|
|
Joined: May 2009
Posts: 27
Member
|
|
Member
Joined: May 2009
Posts: 27 |
I have a CIX670, numbers follow:
Equipment Type: CIX670 : B--U
Equipment Version: AR5.20 MT022.00
VM Sofware Version: 5.5.26
I am having paging problems and want to shoot the wires first. Can someone tell me what to look at for paging configuration and where to begin with the wiring so that I can start in the computer room instead of the paging amp?
Thanx in advance!!
Michael
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Feb 2007
Posts: 1,314
Member
|
|
Member
Joined: Feb 2007
Posts: 1,314 |
You need to figure out what in the CIX670 is providing the paging output to the amp. Typically there would be a card called a BIOU in the CIX to do this but it could also a trunk card RCOU providing the link. There are also a few other scenarios that could be taking place but we'll just start here. When you figure it out, thats your starting point.
BTW, what are the issues that you are having with the paging? That might help in diagnosing the problem.
|
|
|
|
|
Joined: May 2009
Posts: 27
Member
|
|
Member
Joined: May 2009
Posts: 27 |
Thanx for the fast response Travis!
The problem is humm and very low volume. I have an ancient Bogen 100Watt amp. When I disconnect the input jack from the amp the humm goes away. I disconnected all but one horn and still see the humm and LV. I want to eliminate the wiring before I replace the amp.
Michael
|
|
|
|
|
Joined: Sep 2005
Posts: 9,289 Likes: 15
Admin
|
|
Admin
Joined: Sep 2005
Posts: 9,289 Likes: 15 |
If the hum goes away when you unplug the input then you either have a bad feed from the KSU, bad wire between the KSU and amp or a grounding problem.
|
|
|
|
|
Joined: May 2009
Posts: 27
Member
|
|
Member
Joined: May 2009
Posts: 27 |
Found that we were wired through BIOU and had a bad connection at a cross-connect! Thank you all for your valued input!!  Michael
|
|
|
|
Forums84
Topics94,524
Posts640,007
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
195
guests, and
40
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
