|
|
Joined: May 2002
Posts: 17,747 Likes: 37
Member
|
|
Member
Joined: May 2002
Posts: 17,747 Likes: 37 |
Good point on the DSL. Also could be a fried filter with the storms.
Retired phone dude
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2005
Posts: 9,181 Likes: 9
Spam Hunter
|
|
Spam Hunter
Joined: Dec 2005
Posts: 9,181 Likes: 9 |
I don't know if Panasonic still markets stand alone answering machines. AT&T and GE still do. If the loop current is on the low side, would that cause the answering machine to think that the calling party hung-up?
The DSL angle is a good one. Do you have DSL service?
I Love FEATURE 00
|
|
|
|
|
Joined: Aug 2008
Posts: 6
Member
|
|
Member
Joined: Aug 2008
Posts: 6 |
Thanks for the suggestions. No, I do not have DSL. Yes, I did unplug all other devices and still had the problem. I will try the caller ID tonight and post results tomorrow.
Thanks for all the help,
Bobny
|
|
|
|
|
Joined: Jul 2003
Posts: 6,768
Member
|
|
Member
Joined: Jul 2003
Posts: 6,768 |
Originally posted by merlinman:
As a crusty old BELL SYSTEM Person, I will give you a very terse, but truthful answer:
Your problem didn't start after the storm.
Your problem started January 1, 1984.
And very few people will understand that statement.
I understand it, only too well. 
|
|
|
|
|
Joined: Jul 2001
Posts: 3,347 Likes: 10
Moderator-Avaya-Lucent, Antique Tele
|
|
Moderator-Avaya-Lucent, Antique Tele
Joined: Jul 2001
Posts: 3,347 Likes: 10 |
Try with a phone cord that does not do a "rollover" from end to end - I have seen devices that won't work if Tip and Ring are reversed.
|
|
|
|
|
Joined: Aug 2008
Posts: 6
Member
|
|
Member
Joined: Aug 2008
Posts: 6 |
To follow up, I tried the caller ID on outgoing calls and our ID comes up fine.
bobny
|
|
|
|
|
Joined: May 2002
Posts: 17,747 Likes: 37
Member
|
|
Member
Joined: May 2002
Posts: 17,747 Likes: 37 |
Well so much for that idea. I think any other test would probably have to be done by someone with knowledge of testing POTS lines. Might try Tommy's suggestion.
Retired phone dude
|
|
|
|
|
Joined: Dec 2005
Posts: 9,181 Likes: 9
Spam Hunter
|
|
Spam Hunter
Joined: Dec 2005
Posts: 9,181 Likes: 9 |
Is the Network Interface (the device the separates the outside cable from the inside wiring) a box with a hinged door? It might be located outside near where the telephone cable enters the house. If it is, can you plug the answering machine into the test jack located inside the demarc and see if the unit acts the same way? (This is a real shot in the dark, but what the heck!  )
I Love FEATURE 00
|
|
|
|
|
Joined: Dec 2007
Posts: 908
Member
|
|
Member
Joined: Dec 2007
Posts: 908 |
Yes I remember 1984 well just was told to find a place to work, other wise your check will be in San Ramon and only a short time left for the 30 and out!
|
|
|
|
|
Joined: Aug 2008
Posts: 6
Member
|
|
Member
Joined: Aug 2008
Posts: 6 |
Dexman - I found the network interface outside and took the cover off. There is no test jack inside; only 4 lugs with phone lines attached to them.
Bobny
|
|
|
|
Forums84
Topics94,530
Posts640,035
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
164
guests, and
63
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
