Phone Systems

AtcomCloud Online Store
Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Sep 2009
Posts: 1
wooldrb Offline OP
Member
OP Offline
Member
Joined: Sep 2009
Posts: 1
I've just been put in charge of finding out how to program our Night button. Currently it transfers to one extention when the Night mode is enabled, and I'm trying to figure out how to change the extention it rings to. I would also like to have it ring the page system after a certain amount of time.

After a fair bit of research, I think I have a plan on how to acheive this.
Quote
DK424: the programming telephone must be a 20-button LCD DKT or EKT connected to circuit 6
of a PDKU or PEKU installed in cabinet slot 11 and/or slot 12.
My problem seems to be, I can't figure out where to plug in the phone [DKT2020-SD]. I have pictures of the cabinet that I can provide.

Also, I think I want to program 77-3 for the ringing over the intercom. Is this correct?

Thank you for any help in advance!

Atcom VoIP Demo
VoIP Demo
Joined: Jan 2006
Posts: 2,266
Likes: 1
Member
*****
Offline
Member
*****
Joined: Jan 2006
Posts: 2,266
Likes: 1
You must program from port 005 , usually X-205 . It is porgram 78 where you program ringing oner paging and the system must be in night mode for it to ring over the paging. As far as changing the extension that rings in night mode , if you are using POTS lines then program 87.

Joined: Jun 2003
Posts: 3,273
Likes: 1
Moderator-Toshiba
*****
Offline
Moderator-Toshiba
*****
Joined: Jun 2003
Posts: 3,273
Likes: 1
Ok guys, I'm gonna have to step in here and put a stop to this. There's too much information given out about how to get into programming. The responses so far are as clear as it's going to get. Your original post was about day/night mode, but it's turned into how to get into programming which is an entirely different subject. A subject that will not be discussed in detail in this open forum. I have deleted all posts regarding how to get into programming and/or anything off the subject and have PM'd the OP with specific details on how to get into programming. At this point on, please stay on subject.


Moderated by  Carlos#1, phonemeister 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,682
Posts636,151
Members49,603
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
Today's Birthdays
sandi ann
Newest Members
Motel6Guy, JustAGuy, Dialtony, FatherLot, RFarrarMD
49,603 Registered Users
Top Posters(30 Days)
Toner 11
Yoda 9
dexman 6
Who's Online Now
2 members (Toner, justbill), 62 guests, and 65 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: Best VoIP Phones | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2022
Powered by UBB.threads™ PHP Forum Software 7.7.5