|
Joined: Aug 2009
Posts: 7
Member
|
OP
Member
Joined: Aug 2009
Posts: 7 |
Hello I am a tech in the Tampa area. I have the following question if anyone can help me out. My customer has a Toshiba Dk280. They have 1 CO Line Card, 1 8 Port Digital Station Card, and the CPU Card in the system. I need to install 1 more 8 Port Digital Station Card. Can someone PLEASE let me know which slot to put it in as well as any of the programming to get the card ACTIVE. I know how to program the phones but I need any advice/support on programming the new 8 Port Digital Station card which is the PDKU 1 - so please let me know... Thank you My email is [email protected]Thank you...
Tampa Voip Systems
|
|
|
|
Joined: Jan 2006
Posts: 2,266 Likes: 1
Member
|
Member
Joined: Jan 2006
Posts: 2,266 Likes: 1 |
Put it in the next available slot , and use program 03 , to assign the card . Then you musy cycle the power.
|
|
|
|
Joined: Aug 2002
Posts: 4,919 Likes: 1
Administrator
|
Administrator
Joined: Aug 2002
Posts: 4,919 Likes: 1 |
This question must be really important since it was posted so many places. TVoip before you tackle that 280 get a manual and a 20 button display phone. You are going to need both. It not just as simple as adding the card and punching down a jumper.
|
|
|
Forums84
Topics93,881
Posts637,005
Members49,673
|
Most Online5,661 May 23rd, 2018
|
|
2 members (mtncomm1, newtecky),
69
guests, and
15
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|