sundance-communications.com/forum Forums TDM Business Telephone Systems Toshiba Telephones & Systems Toshiba DK 280 HELP!!! Please advise...

Hello

I am a tech in the Tampa area.

I have the following question if anyone can help me out.

My customer has a Toshiba Dk280.

They have 1 CO Line Card, 1 8 Port Digital Station Card, and the CPU Card in the system.

I need to install 1 more 8 Port Digital Station Card.

Can someone PLEASE let me know which slot to put it in as well as any of the programming to get the card ACTIVE. I know how to program the phones but I need any advice/support on programming the new 8 Port Digital Station card which is the PDKU 1 - so please let me know...

Thank you

My email is [email protected]

Thank you...

Put it in the next available slot , and use program 03 , to assign the card . Then you musy cycle the power.

This question must be really important since it was posted so many places.

TVoip before you tackle that 280 get a manual and a 20 button display phone. You are going to need both. It not just as simple as adding the card and punching down a jumper.