sundance-communications.com/forum Forums TDM Business Telephone Systems Toshiba Telephones & Systems LCR USING SIP FIRST THEN BRI

Hey guys happy new year,
Just been to a customers site for a new install today and have installed Sip lines for them 8 in total and they also have 2 BRI's

i have set up LCR dial 0 and set tables up so if they dial 0-9 it goes out via OLG 9 but say if their adsl goes down how do i program it to select the BRI's using OLG 2 when they dial 0 to get a line?

cheers

Prgs 524 and 525. In the route table, you can define up to 6 route definitions. Each of these can use a different OLG. In your case you coul.d define route definition 2 and 9 to use OLG 2 and 9 repectively, then add these to the table 9 first then 2. If the SIP lines are down or busy it will go to the next OLG which would be OLG 2, your BRI.

This is assuming you have 0 defined as LCR access and not as an outgoing line group in the flexable access codes.