sundance-communications.com/forum Forums TDM Business Telephone Systems Toshiba Telephones & Systems Netphone and feature codes.

Can somebody tell me how I would program a feature code such as a call forward onto one of the netphone buttons? I would like to do something like this #6041,1111,8# to forward to ext 1111 after 8 secs but that doesnt seem to work using feature code as for the action. I do not have a working Netserver to test this on so I am just using a netphone in demo mode to try figure this out so I can't really test that it actually works. Ideally the customer wants one key to turn the feature on and then another to turn it off. Any ideas?

Nevermind, got it figured out.

What was the problem ?

There really wasn't a problem, it works just as I have it above only change the 8# to 08. I think it works either way but in the manual it says its looking for two numbers.

On a side note, anybody know what would cause a phone to recall after putting in the feature code? Customer is stating that even when he manually enters the feature code on the receptionist phone that it recalls back with a fast busy, and the display reads "1111 Recall".