web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#203954 03/31/11 12:56 PM
Joined: Mar 2011
Posts: 4
Member
OP Offline
Member
Joined: Mar 2011
Posts: 4
Info: I have a CIX 670 firmware AR5.20 MT052.00
The phone setup is a 2000 dkt 20 button and a 60 button DSS set. The phone has a 1 pdn and 5 phantom dn's in a hunt group. The phone gets all different kinds of calls all day.
Problem: When a call is on hold on the 1st dn, phantom dn 3 blinks rapidly, appearing like a call is coming in. This appears to happen regardless of any other of the phantom lines in use. Phantom line 3 also exhibits this problem when the soft key "page button" has been hit twice. The rapid blinking on line 3 disappears when the page button is hit one more time. When the phone system is rebooted, the problem then doesn't appear again for 2-3 days.

I do the phone system's programming. How does anybody go about fixing this problem? :bang:

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

#203955 03/31/11 12:58 PM
Joined: Mar 2011
Posts: 4
Member
OP Offline
Member
Joined: Mar 2011
Posts: 4
Also, I really wanted to get that problem out there. I forgot to say hello to all. This is the best site I have seen with people collectively helping each other with these proprietary phone system's: Awesome.

#203956 04/04/11 09:25 AM
Joined: Feb 2011
Posts: 3
Member
Offline
Member
Joined: Feb 2011
Posts: 3
My first post on here!!

I have the same problem on my CIX 670. Last Tuesday (3/29) the vendor who does more complex maintenance for us came and installed a BCTU2A processor and a BEXu2A expansion card. I was gone on Wednesday and when I came in our main station which has a pdn and 4 or 5 phantom dn's has "hold" on the DKT3020 display and one of the phantom dns flashes what looks like to be the 10 pulses per second. If you press the "page" soft key it will go away. This station has a DDS3060 as well as a add on module.

Our vendor came in (very knowledgeable)and he had never seen that problem before and he fixed it by deleted the entire station and adding it back. Problem fixed UNTIL I came in this morning and the same problem was happening again.

Any thoughts?!?

#203957 04/04/11 12:11 PM
Joined: Mar 2011
Posts: 4
Member
OP Offline
Member
Joined: Mar 2011
Posts: 4
Hey yes we just switched Proc's too. Not to mention in the first post I have tried all these things. Reboots, unplugs, reprogrammed the phone, check and double checked the programming. Even took out the phdn that the problem occurs on and it still does it.
I guarantee it's something small and insignificant.

#203958 04/05/11 01:32 AM
Joined: Feb 2011
Posts: 3
Member
Offline
Member
Joined: Feb 2011
Posts: 3
I noticed also that the if I remove the phdn the "hold" is on the display still and even though the button is not usuable since I removed the phdn, it still flashes.

Hopefully someone has an easy answer...

#203959 04/05/11 05:04 AM
Joined: Jun 2003
Posts: 3,273
Likes: 1
Moderator-Toshiba
*****
Offline
Moderator-Toshiba
*****
Joined: Jun 2003
Posts: 3,273
Likes: 1
If the affected station is on a BDKU version 1, change it out with a new version.

#203960 04/05/11 07:24 AM
Joined: Apr 2011
Posts: 2
Member
Offline
Member
Joined: Apr 2011
Posts: 2
I believe this problem was resolved with the newest software upgrade available on point release if you dont have access to point release contact your dealer to get the newest software


Tech@Access
#203961 04/05/11 07:40 AM
Joined: Feb 2011
Posts: 3
Member
Offline
Member
Joined: Feb 2011
Posts: 3
Access Tech. Unfortunately I am not familiar with "point release". Do you mean the eManager software(We have version V5.20A06f)? Or is this the actual software on the processor (I looked under program 901 and it states AR5.20 MT052.00)? This may make sense that we do not have the newest version of some software because I asked the vendor tech if we need to update any settings, etc. after the export from old processor and import to new processor and he said "eh, we can do it as needed".

phonemeister, the station states Model DKT3020-SD and right under that it states V.1. Is this the version 1 you are referring to? Hopefully we do not have to spend the money to replace the phone just to fix this issue.

#203962 04/05/11 09:27 AM
Joined: Jun 2003
Posts: 3,273
Likes: 1
Moderator-Toshiba
*****
Offline
Moderator-Toshiba
*****
Joined: Jun 2003
Posts: 3,273
Likes: 1
The BDKU is the station card inside the CIX cabinet.

#203963 04/05/11 10:17 AM
Joined: Mar 2011
Posts: 4
Member
OP Offline
Member
Joined: Mar 2011
Posts: 4
To phonemeister I haven't gave that a shot yet, so I'll have to try it. Wondering both phone and DSS?
I'm guessing since its only the phone the phone is all that matters. Gheesh I totally over looked that BDKU cards. See if memory serves me correctly BDKU is post PDKU card? anyway I'm now convinced that's the problem. I never think about the equipement. DARN

Page 1 of 2 1 2

Moderated by  Carlos#1, phonemeister 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,712 CTX100 install
186,796 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
jc2it 4
teleco 4
Who's Online Now
1 members (Toner), 116 guests, and 244 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5