|
Joined: May 2011
Posts: 37
Member
|
OP
Member
Joined: May 2011
Posts: 37 |
Alright - My customer took a very nearby lightning strike. and I have the following symptons.
CO lines will dial in, and ring the right phones. when you answer cannot hear voice either direction.
when trying to pick a line from a phone, cannot hear/get dialtone
station to station, is extremely distorted
tried pulling all but one pdku2, and the rctuc3 and d3, and did a station to station call and still distorted.
I have three cabinets - cabinet 1 - in slots 1 and 2 I have rctuc3 and a rctu3d all the remainder are filled with pdku2's
cabinet 2. first 2 slots, pdku2's,third is rstu2, fourth is pdku2, fifth is 8 line co card, sixth is piou1
cabinet three - 2 line co card, and 2 pdku2's. -------------------------------
Any thoughts on where to start. Could 1 or all the cabinets be damaged? I have no sign directly of the any scorching.
of course I know how little that means.
i have tried just pulling the co cards to see if that cleared the station to station intercom distortion, and that had no effect.
thanks Michael
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: May 2011
Posts: 37
Member
|
OP
Member
Joined: May 2011
Posts: 37 |
alright, one of my local guys suggested it was the brain - rctuc3 and a rctu3d i'm finding the rctuc3 fairly cost effectively, however any I find in pairs, are extremely expensive. the cabinet is a dksub424a, anyone know what brain combinations are compatible with this. I'm hoping to get something overnited in the a.m. to arrive Wednesday if at all possible.
|
|
|
|
Joined: Feb 2007
Posts: 330
Member
|
Member
Joined: Feb 2007
Posts: 330 |
I agree with RCTU failure. I had similar issues with a bad RCTU...
Hodgkin's Lymphoma Survivor! Took a step 20 years back in time. Managing the VHF radio network for the Florida Forest Service. Caloosahatchee District 17.
|
|
|
|
Joined: Sep 2004
Posts: 2,017
Moderator-Toshiba, Request an Installer
|
Moderator-Toshiba, Request an Installer
Joined: Sep 2004
Posts: 2,017 |
The A is for a single cabinet, B/B is for two cabinets and C/D is for 3 to 5 Cabinets.
So you will need the RCTUC and RCTUD BOTH! Watch the chip levels. C3 is Release 3 and C4 is Release 4. Either will work since it sounds like you will be programming from scratch...
Good Luck
|
|
|
|
Joined: Jan 2010
Posts: 933 Likes: 1
Moderator-Toshiba
|
Moderator-Toshiba
Joined: Jan 2010
Posts: 933 Likes: 1 |
have you checked the power supply trips press the little white pegs in and if one clicks it had tripped. sounds like you have lost 1 of the back plane voltages. have you tried a new power supply?
Regards Carl
|
|
|
|
Joined: May 2011
Posts: 37
Member
|
OP
Member
Joined: May 2011
Posts: 37 |
It was the brains, replacing them resolved all issues. thanks for taking the time to reply!!
|
|
|
Forums84
Topics93,967
Posts637,413
Members49,704
|
Most Online5,661 May 23rd, 2018
|
|
|
|