Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
SMDI on IVP8-R2
#205214 09/28/11 07:31 PM
Joined: Sep 2004
Posts: 2,017
Voyager Offline OP
Moderator-Toshiba, Request an Installer
*****
OP Offline
Moderator-Toshiba, Request an Installer
*****
Joined: Sep 2004
Posts: 2,017
I think it's the old age thing........I have set up lots of IVP8's for SMDI, but I can't get the one in my own house to work!

CIX100 R5.20MT052 using Serial Port2 for SMDI.
I/O Device is RS-232, 9600-8-N-1 on BSIS Port 2
VMID Code and MSG Center is set.

Plug-n-Play set for CTX100S, Base Port No. is 601. When I dial the Pilot (600) it says "Enter your Security Code". Notification is set for 3 digits.

What am I missing? The only thing it doesn't do is turn the msg lights on and off.


Now available Voicemail Programmer Kit to program your Toshiba Voice Mail across your network.

Toshiba Technical Support at: One Ring Telecom
Toshiba Telephones and Equipment
Re: SMDI on IVP8-R2
#205215 09/28/11 10:02 PM
Joined: Jun 2005
Posts: 2,547
Member
Offline
Member
Joined: Jun 2005
Posts: 2,547
Since the VM seems to answer correctly, it would appear that SMDI is working. SInce you are using port 2 on the BSIS I would assume port 1 is being used for running reports on the rest of your house?

Plug and play makes me nervous sometimes. It broke a brand new IVP8 one time a few years ago.

I think I remember one time that message notification was using the wrong COM port.

Re: SMDI on IVP8-R2
#205216 09/29/11 12:41 AM
Joined: Jun 2003
Posts: 3,253
Moderator-Toshiba
*****
Offline
Moderator-Toshiba
*****
Joined: Jun 2003
Posts: 3,253
Dan, that's what you get for getting the processor off of ebay! :rofl: I had this happen to me last week. Check the Stratagy Parameters and make sure "pbx_type" is set for 100S. If not, change it and reboot.

Re: SMDI on IVP8-R2
#205217 09/29/11 07:52 AM
Joined: Sep 2004
Posts: 2,017
Voyager Offline OP
Moderator-Toshiba, Request an Installer
*****
OP Offline
Moderator-Toshiba, Request an Installer
*****
Joined: Sep 2004
Posts: 2,017
Thanks guys. BSIS Port 1 is being used for SMDR. This voicemail card was working properly a few months ago before the iES32 (which died Yesterday). I will check the 100s setting and also change it back to BSIS port 1.


Now available Voicemail Programmer Kit to program your Toshiba Voice Mail across your network.

Toshiba Technical Support at: One Ring Telecom
Re: SMDI on IVP8-R2
#205218 09/30/11 12:36 AM
Joined: Jun 2005
Posts: 2,547
Member
Offline
Member
Joined: Jun 2005
Posts: 2,547
Quote
Originally posted by Voyager:
BSIS Port 1 is being used for SMDR.
I will check the 100s setting and also change it back to BSIS port 1.
I didn't think the BSIS was the problem, as long as you have a 2nd license. I was just trying to guess how port 1 was being used.

I was thinking of the notify string trying to use the wrong COM port on the srtatagy. I don't rememebr if I have seen this before. Just making guesses.

Re: SMDI on IVP8-R2
#205219 09/30/11 12:42 AM
Joined: Jun 2003
Posts: 3,253
Moderator-Toshiba
*****
Offline
Moderator-Toshiba
*****
Joined: Jun 2003
Posts: 3,253
Quote
Originally posted by Voyager:
This voicemail card was working properly a few months ago before the iES32 (which died Yesterday).
Wait, Dan, do you have a backup of the iES32? I'm assuming the hard drive failed.

Re: SMDI on IVP8-R2
#205220 09/30/11 07:26 AM
Joined: Sep 2004
Posts: 2,017
Voyager Offline OP
Moderator-Toshiba, Request an Installer
*****
OP Offline
Moderator-Toshiba, Request an Installer
*****
Joined: Sep 2004
Posts: 2,017
I don't care about the iES backup. Its for my home and i can always rebuild it. Although it would be nice to retain the 8 ports and 30 seats of UM.

I unplugged it about three weeks ago and when I plugged it back in Wednesday, it will boot and I can get in with the Admin software. Dialed in and all acted fine. Within a minute it shutdown. Re-Booted again and same problem.


Now available Voicemail Programmer Kit to program your Toshiba Voice Mail across your network.

Toshiba Technical Support at: One Ring Telecom
Re: SMDI on IVP8-R2
#205221 10/01/11 04:47 AM
Joined: Sep 2004
Posts: 2,017
Voyager Offline OP
Moderator-Toshiba, Request an Installer
*****
OP Offline
Moderator-Toshiba, Request an Installer
*****
Joined: Sep 2004
Posts: 2,017
Bad news is I still can't get the notification to work on the IVP8.

Good news is the iES32 is back up and running!


Now available Voicemail Programmer Kit to program your Toshiba Voice Mail across your network.

Toshiba Technical Support at: One Ring Telecom
Re: SMDI on IVP8-R2
#205222 10/04/11 11:29 AM
Joined: Aug 2009
Posts: 35
Member
Offline
Member
Joined: Aug 2009
Posts: 35
I'm going to guess you checked the notify for each mailbox? I've had problems with the default notify and always end up changing the variable from %E to %U

Re: SMDI on IVP8-R2
#205223 10/04/11 01:52 PM
Joined: Sep 2004
Posts: 2,017
Voyager Offline OP
Moderator-Toshiba, Request an Installer
*****
OP Offline
Moderator-Toshiba, Request an Installer
*****
Joined: Sep 2004
Posts: 2,017
drhoser.... I've not heard that before. I will try it next weekend.

Thanks


Now available Voicemail Programmer Kit to program your Toshiba Voice Mail across your network.

Toshiba Technical Support at: One Ring Telecom

Moderated by  Carlos#1, phonemeister 

Link Copied to Clipboard
Forum Search
Most Recent 5 Post
KXTD816 ringing wrong extension
by ToshiGal75 - 05/25/20 06:02 PM
SV9100 with 10 digit DIDs on SIP
by conxtel - 05/22/20 08:58 PM
SV9100 CP20 Question
by erniejoey - 05/22/20 11:41 AM
Magix positive telco disconnect
by Brian A - 05/21/20 05:54 PM
Nortel CICS 10 call log
by Droptop - 05/21/20 02:35 PM
Who's Online Now
6 members (dexman, Rok1215, morephones, RATHER BE FISHING, nortelvoip, ChrisRR), 93 guests, and 32 robots.
Key: Admin, Global Mod, Mod
Popular Topics (Views)
Forum Statistics
Forums95
Topics93,717
Posts635,850
Members49,286
Most Online5,661
May 23rd, 2018
Today's Birthdays
kevitosc, MJK
Newest Members
nikauri, Darrel Mullins, fleming23, AKP, Oso Rojo
49285 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
EMP & Lightning Home Surge Protection
EMP - Click Here!
Top Posters (30 Days)
Bob-o 14
hbiss 9
Ruben 9
Bluewater Sailing
https://www.patreon.com/bePatron?u=5256033
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2020
Trusted Partners