Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
DK 40 auto dial buttons and ext names
#205270 10/10/11 08:47 AM
Joined: Nov 2003
Posts: 480
cctech Offline OP
Member
OP Offline
Member
Joined: Nov 2003
Posts: 480
I am trying to put auto dial buttons on the phones on a dk40. I tried using prog 39 but for some reason it is not working. Also I would like to name the exts. Does any have an idea about how this is done. Thanks

Toshiba Telephones and Equipment
Re: DK 40 auto dial buttons and ext names
#205271 10/10/11 09:26 AM
Joined: Jun 2003
Posts: 3,254
Moderator-Toshiba
*****
Offline
Moderator-Toshiba
*****
Joined: Jun 2003
Posts: 3,254
You can't store a phone number directly on a button. You can, though, program a system or station speed dial bin on a button and then program the phone number in that bin. System speed dials are entered from port 000. As for the name on the phone, it's #621. Use the # key to switch to alpha characters and the 0 key to cycle through the letters. The user guide has this information and how to enter speed dials too.

Re: DK 40 auto dial buttons and ext names
#205272 10/10/11 09:36 AM
Joined: Nov 2003
Posts: 480
cctech Offline OP
Member
OP Offline
Member
Joined: Nov 2003
Posts: 480
I have been reading through earlier posts and realize that i said the wrong thing. I need to know how to make DN buttons. Itried this in program 39 but it didn't take. Maybe I have the procedure wrong.

Re: DK 40 auto dial buttons and ext names
#205273 10/10/11 10:10 AM
Joined: Jun 2003
Posts: 3,254
Moderator-Toshiba
*****
Offline
Moderator-Toshiba
*****
Joined: Jun 2003
Posts: 3,254
You mean DSS or BLF keys? It's #NNN where NNN is the port number.

Re: DK 40 auto dial buttons and ext names
#205274 10/10/11 10:22 AM
Joined: Nov 2003
Posts: 480
cctech Offline OP
Member
OP Offline
Member
Joined: Nov 2003
Posts: 480
so if i were making a dss key for ext 10, would i go into program 39 and after spkr 000# i would touch the button that i want to use and then dial #000 again for ext 10. I think i tried that and it just puts a * on the button.

Re: DK 40 auto dial buttons and ext names
#205275 10/10/11 10:37 AM
Joined: Feb 2007
Posts: 330
Member
Offline
Member
Joined: Feb 2007
Posts: 330
Then that extension is programmed somewhere else on the phone. Look at all the buttons in prog 39. Are you using a 20 button phone? Maybe programmed on a button that you don't have..


Hodgkin's Lymphoma Survivor! Took a step 20 years back in time. Managing the VHF radio network for the Florida Forest Service. Caloosahatchee District 17.
Re: DK 40 auto dial buttons and ext names
#205276 10/10/11 05:13 PM
Joined: Nov 2003
Posts: 480
cctech Offline OP
Member
OP Offline
Member
Joined: Nov 2003
Posts: 480
Some phones are 2020's and some are 2010's. I checked all the buttons and none of them are programmed for dss buttons.

Re: DK 40 auto dial buttons and ext names
#205277 10/10/11 05:31 PM
Joined: Feb 2007
Posts: 330
Member
Offline
Member
Joined: Feb 2007
Posts: 330
Make sure that ext.200 is programmed for a 2020 and not a 2010 in prog 38. Also make sure that you are actually programming ext 200. Prog 04 to verify port-station assignment. That's all that I can think of with regards to your problem.


Hodgkin's Lymphoma Survivor! Took a step 20 years back in time. Managing the VHF radio network for the Florida Forest Service. Caloosahatchee District 17.
Re: DK 40 auto dial buttons and ext names
#205278 10/10/11 05:44 PM
Joined: Nov 2003
Posts: 480
cctech Offline OP
Member
OP Offline
Member
Joined: Nov 2003
Posts: 480
I didn't realize that the set type must be defined in prog 38. I will have to go back and take a look at that.

Re: DK 40 auto dial buttons and ext names
#205279 10/10/11 06:22 PM
Joined: Feb 2007
Posts: 330
Member
Offline
Member
Joined: Feb 2007
Posts: 330
Yep. I ran into this last week. Took me a little bit to figure it out. Especially when I only had a DK16 admin guide with me.


Hodgkin's Lymphoma Survivor! Took a step 20 years back in time. Managing the VHF radio network for the Florida Forest Service. Caloosahatchee District 17.

Moderated by  Carlos#1, phonemeister 

Link Copied to Clipboard
Forum Search
Most Recent 5 Post
NS1000 RENUMBER 600 and IDC GROUPS
by ronaldjamesh - 05/31/20 11:54 AM
Spam Canned Meat Varieties
by dexman - 05/30/20 01:37 AM
Partner ACS T1 module setup
by ChrisRR - 05/29/20 08:32 PM
SL1100/2100
by Derm J - 05/29/20 11:07 AM
APC SU1000XL Operating Question
by EV607797 - 05/28/20 07:34 AM
Who's Online Now
22 members (Professor Shadow, RATHER BE FISHING, Yoda, hbiss, Ruben, OBT, mongo5150, Curlycord, Tip&Ring, Mercenary Roadie, nortelvoip, pdxjim911, Touch Tone Tommy, ronaldjamesh, jeffmoss26, justbill, Serge, KRRath, gelehu, JBean3329, MooreTel, metelcom), 125 guests, and 36 robots.
Key: Admin, Global Mod, Mod
Popular Topics (Views)
Forum Statistics
Forums94
Topics93,729
Posts635,905
Members49,292
Most Online5,661
May 23rd, 2018
Today's Birthdays
Buckshot, finlover, hitech-redneck, kevhawk13, Lancomm Steve, sjohnson, techdudeben
Newest Members
swoodsNI, B. Endsley, Abner Dawes, Gringo, Jeffrey Cohen
49292 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
EMP & Lightning Home Surge Protection
EMP - Click Here!
Top Posters (30 Days)
dexman 19
Bob-o 14
hbiss 11
Bluewater Sailing
https://www.patreon.com/bePatron?u=5256033
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2020
Trusted Partners