|
|
|
|
Joined: Sep 2008
Posts: 19
Member
|
|
Member
Joined: Sep 2008
Posts: 19 |
I tried wiring up a serial to RJ11 interface for the GVPH but I am not sure if I did it correctly.
I am using a RJ11 (6-pin) biscuit jack and I have a pre-wired DB9 (female) to wire up to the biscuit jack. Can someone give me a pin-to-pin run-down of how this interface should be made? Preferably giving me the colors on the RJ11 side, if possible.
Ken
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2008
Posts: 19
Member
|
|
Member
Joined: Sep 2008
Posts: 19 |
This is the DB9 pin-out I was looking at: https://www.aggsoft.com/rs232-pinout-cable/serial-port-db9.htm And there is a pin-out for the GVPH interface in the technical manual. When I wire it up the way it appears that is should be wired up, I do not get a connection to the GVPH using any baud rate.
|
|
|
|
|
Joined: Jun 2005
Posts: 2,722 Likes: 7
Member
|
|
Member
Joined: Jun 2005
Posts: 2,722 Likes: 7 |
|
|
|
|
|
Joined: Aug 2002
Posts: 4,932 Likes: 1
Administrator
|
|
Administrator
Joined: Aug 2002
Posts: 4,932 Likes: 1 |
Do you have the correct software also?
|
|
|
|
Forums84
Topics94,515
Posts639,966
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (justbill, NateBates),
155
guests, and
31
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/ad-icon/1013.gif){kind=icon}