|
|
|
|
Joined: May 2012
Posts: 4
Member
|
|
Member
Joined: May 2012
Posts: 4 |
I'm trying to program the flex buttons to dial an extension. I'm not doing something right. I'm getting to program mode alright and getting to program 39. But when it asks for the port # and i'm supposed to type in the two digits and then the # key it's not letting me. I have to start with a 0 or it won't show anything. And from there the sequence would be different from the program guide so I'm lost.
Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2007
Posts: 627
Member
|
|
Member
Joined: Jun 2007
Posts: 627 |
Yes the system is programed with port numbers not extension numbers. Prog 04 will tell you what the port numbers are programed with what extension numbers. Or dial 402 on a station and it will tell you what port number it is.
by default the are.
00 = 10
01 = 11
02 = 12
and so on
|
|
|
|
|
Joined: Feb 2007
Posts: 330
Member
|
|
Member
Joined: Feb 2007
Posts: 330 |
39, hold, spkr, port number, # , should get you into flex key assignment.
Hodgkin's Lymphoma Survivor! Took a step 20 years back in time. Managing the VHF radio network for the Florida Forest Service. Caloosahatchee District 17.
|
|
|
|
|
Joined: Sep 2004
Posts: 2,017
Former Moderator-Toshiba, Request an Installer
|
|
Former Moderator-Toshiba, Request an Installer
Joined: Sep 2004
Posts: 2,017 |
If you have to start with a 0, then you may have a DK16e which requires 3-digit port numbers.
|
|
|
|
Forums84
Topics94,520
Posts639,988
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
521
guests, and
42
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
