|
|
Joined: May 2004
Posts: 242
Member
|
OP
Member
Joined: May 2004
Posts: 242 |
I put a msug on a slb12 on a xts, to get a message waiting lamp to come on a phone, when there is a voicemail message in the mailbox. I know it is the right mailbox, because when I leave a message in the mailbox, the phone will get stutter dialtone, when the phone is picked up. The light feature for the extension was sent to message waiting and voicemail, to see if that made any difference, it didn't.
Any suggestions would be helpful. Thanks in advance.
mike
|
|
|
|
|
Joined: May 2004
Posts: 30
Member
|
|
Member
Joined: May 2004
Posts: 30 |
Just a though but make sure your msgu is a msgu48 if your slib card is an E or C model. Also those take two msgu48 to make all 12 work so they may be slot oriented.
|
|
|
|
|
Joined: Jul 2004
Posts: 16
Member
|
|
Member
Joined: Jul 2004
Posts: 16 |
Your problem is programming Flash 50 page B button 1 Dial 7 and press hold for that station. This ID's the station as SLT with MSG 90vdc Programming **3226 Flash 50 XXX-XXX Station range (range of SLT's) Press flex button 20 Press flex button 1 Dial 7 and press hold Your done. <font face="Verdana, Arial" size="2">Originally posted by OLD TECH:
I put a msug on a slb12 on a xts, to get a message waiting lamp to come on a phone, when there is a voicemail message in the mailbox. I know it is the right mailbox, because when I leave a message in the mailbox, the phone will get stutter dialtone, when the phone is picked up. The light feature for the extension was sent to message waiting and voicemail, to see if that made any difference, it didn't.
Any suggestions would be helpful. Thanks in advance.
mike</font> [This message has been edited by vodaviman (edited July 15, 2004).]
vodaviman
|
|
|
|
Forums84
Topics93,879
Posts637,002
Members49,673
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
108
guests, and
20
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
