"VM ALARM 1 2" on Powerup - Phone & VOIP Info

Print Thread

Rate Thread

"VM ALARM 1 2" on Powerup #208539 04/18/05 03:47 AM
Joined: Apr 2005 Posts: 41 Delaware Syme Member
Syme Member Joined: Apr 2005 Posts: 41 Delaware	After testing some things I shut the KSU down on Friday afternoon before leaving. When I came in this morning I turned it back on and on Statino 100 I'm getting a message on the LCD. It says "VM ALARM 1 2". In the manual it says this means the digital voice mail is out of service...but even with the error on the LCD I am able to dial into the admin options. What could be causing this error?

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: "VM ALARM 1 2" on Powerup #208540 04/18/05 04:38 PM
Joined: Dec 2001 Posts: 352 Chicago, IL, USA A6 Member
A6 Member Joined: Dec 2001 Posts: 352 Chicago, IL, USA	I have this show up only when doing a reboot of the card. After it comes up, it's working ok. Try entering 656 to clear the error. 606 may also work. Is it possible the card needs to be seated a little more solidly? Tip and ring, the work of the devil!

Re: "VM ALARM 1 2" on Powerup #208541 04/19/05 04:00 AM
Joined: Apr 2005 Posts: 41 Delaware Syme Member
Syme Member Joined: Apr 2005 Posts: 41 Delaware	Not sure what is causing it... I've been getting it whenever the VM card resets also. I used 656 to clear it already, but I was trying to find a solution to it. As for the card being loose, I don't think this would be an issue. The contacts are pretty snug in those slots.

Re: "VM ALARM 1 2" on Powerup #208542 11/27/06 03:28 AM
Joined: Sep 2005 Posts: 206 Upstate New York City42 Member
City42 Member Joined: Sep 2005 Posts: 206 Upstate New York	I have the manuals for Talkpath and Mach 1. Where does it tell me what "vm alarm 0" means? If I open either manual and try searching through it, I can't find a list. I'm not on-site. Also,... what does "vm alarm 0" mean? Besides not working. lol

Re: "VM ALARM 1 2" on Powerup #208543 11/27/06 03:56 AM
Joined: Sep 2005 Posts: 264 South Dakota glacier37 Member
glacier37 Member Joined: Sep 2005 Posts: 264 South Dakota	City42, The thread you have posted in is over a year and a half old. Please start a new thread. I think you will get help much faster. Thanks.

Moderated by EV607797, MnDave, nfcphoneman

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums TDM Business Telephone Systems Vodavi Telephones & Systems "VM ALARM 1 2" on Powerup