Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Aug 2007
Posts: 3
jboyett Offline OP
Member
OP Offline
Member
Joined: Aug 2007
Posts: 3
I'm trying to get the system to ring over the PA at night when a certain station is called. I have it set-up so that one of my CO lines rings direct to the station out in the warehouse at night, but I can't seem to get the external ringing to work. I have the UNA enabled on the CO line and External Night Ringing is enabled. The station rings but nothing over the PA. Any ideas?

EMP & Lightning Home Surge Protection
EMP - Click Here!
Joined: Sep 2005
Posts: 971
Member
Offline
Member
Joined: Sep 2005
Posts: 971
Do you want the station to ring over page speaker
when receivng a intercom call ?

Or do you want the extension in warehouse when ring at night, to also send ring to page speaker?
on outside lines ?

Not sure what you question is. :scratch:


-TJ-
Joined: Aug 2007
Posts: 3
jboyett Offline OP
Member
OP Offline
Member
Joined: Aug 2007
Posts: 3
Our old system in night mode would ring over the page speakers in the warehouse when the station was dialed. I would like to duplicate that on our STSe system. I have a station out in the warehouse and the operator can page people in the daytime when they have a call but at night we only have people in the warehouse, not in the office. I have it set-up so that one of my CO lines rings direct to the station out in the warehouse at night but unless someone is standing right next to the phone they can't hear it. Can this be done on the STSe system?

Joined: Aug 2003
Posts: 5,131
Moderator-Vertical, Vodavi
*****
Offline
Moderator-Vertical, Vodavi
*****
Joined: Aug 2003
Posts: 5,131
Doesn't the UNA just close the relay? It doesn't actually put a tone over the page port, does it?

Joined: Jan 2005
Posts: 15,281
Likes: 3
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Offline
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Joined: Jan 2005
Posts: 15,281
Likes: 3
UNA sends a ring tone over the first external paging output port, but I don't know of any way to make it track the ringing of one specific station. A relay contact can be set to track a station's ringing that's programmed to receive night ringing, but that contact would have to activate an external signaling device.

If the lines are set to ring UNA, they can still ring stations. The problem is that UNA's ringing signal is only sent to an external paging system.

Do you have an external paging system that's connected to page port #1? Also, is the system set to go into night service automatically (or manually)? UDA does the same thing, but only in the day mode if you aren't using any form of night service.


Ed Vaughn, MBSWWYPBX
Joined: Aug 2007
Posts: 3
jboyett Offline OP
Member
OP Offline
Member
Joined: Aug 2007
Posts: 3
We have an external paging system that is accessed by dialing 761. I'm not sure if thats page port #1. The system is set to go into night service automatically. There is only one CO line that is set for UNA and it's not on our roll-over so someone would have to dial that line directly to get to the warehouse station.

Joined: Sep 2005
Posts: 971
Member
Offline
Member
Joined: Sep 2005
Posts: 971
OK, Now you have made yourself clear, and i understand your question, even thought you are not stating it, i will read between the lines.

It has nothing to do with station ring but co ring assignment in night mode, ok.

Yes, it will ring the page speaker in night mode if that station in the warehouse is programmed to ring on night mode on the give line you are referring to.

I have used it before and it does work.
Try putting station 100 in night mode by DND button, not automatic mode first, then work on automatic switching if you like.

Your description of what you want is not very clear.

If you done all the associated programming proper
yes, page speaker will follow ring in night mode


-TJ-

Link Copied to Clipboard
Most Recent 5 Post
Fiber Equipment Installation
by dexman - 01/22/21 11:10 PM
8300 with UCB voicemail to email issue
by Rob Jordan - 01/22/21 06:45 PM
Power unit/interrupter issues
by Telephonemaven - 01/22/21 01:44 AM
TVA 50 datestamp
by Not_sirius - 01/21/21 10:28 PM
Page heard while on park
by Yoda - 01/21/21 10:09 PM
Who's Online Now
20 members (newtecky, Curlycord, morephones, nortelvoip, Meyery2k, Touch Tone Tommy, RATHER BE FISHING, hbiss, justbill, mbhydro, BobRobert, Mercenary Roadie, dexman, Bob3470, Keyset6, OBT, hitechcomm, nonameyet, Ruben, Yoda), 174 guests, and 52 robots.
Key: Admin, Global Mod, Mod
Popular Topics (Views)
Forum Statistics
Forums94
Topics94,194
Posts638,615
Members49,401
Most Online5,661
May 23rd, 2018
Today's Birthdays
James Banks, SoCal Rob
Newest Members
Schreiber, RotoTech99, corkie, FixYaBrokeStuff, Hopedpocketts
49,401 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
Top Posters (30 Days)
dexman 35
Yoda 19
Bluewater Sailing
https://www.patreon.com/bePatron?u=5256033
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Sold AD
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2021
Trusted Partners