|
|
Joined: Jun 2007
Posts: 31
Member
|
OP
Member
Joined: Jun 2007
Posts: 31 |
Thanks to Oldh20skier for the program info on the sts I am working on but I am missing something in programming. I enter program mode with no problem and press flash 50 but when I try to go to page C (which I thought was just pressing button 21) nothing happens. The display says 'Extension Range" or somethin similiar, but I can never get to the next step, which is to press button 4 and dial ### to change call forward busy/rna to rna only.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2002
Posts: 17,722 Likes: 18
Member
|
Member
Joined: May 2002
Posts: 17,722 Likes: 18 |
The extension range is the extensions you want to program. If it's only one extension enter it twice. Do you have a manual? If so just follow it step for step, you'll be fine.
Retired phone dude
|
|
|
|
|
Joined: Jun 2007
Posts: 31
Member
|
|
OP
Member
Joined: Jun 2007
Posts: 31 |
Right.. I pressed 100 on the tone pad but nothing came up on the display. It seemed no matter what keys I pressed on the phone it made no change in the display.
|
|
|
|
|
Joined: May 2002
Posts: 17,722 Likes: 18
Member
|
|
Member
Joined: May 2002
Posts: 17,722 Likes: 18 |
Retired phone dude
|
|
|
|
|
Joined: Jan 2005
Posts: 15,379 Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
|
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,379 Likes: 13 |
You have to enter the station range, not just the station number. If you are programming one single station, you must enter the station number twice and then press hold like Bill said.
Ed Vaughn, MBSWWYPBX
|
|
|
|
Forums84
Topics94,294
Posts638,835
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
