|
|
|
|
Joined: Mar 2009
Posts: 37
Member
|
|
Member
Joined: Mar 2009
Posts: 37 |
Hi folks,
Have an STSe inskin HDD that intermittantly stops answering with AA. This is the 3rd unit and it does exactly the same thing. Also replaced the sts with no help. Have all the ports (150-157) in both 30 and 65. Reprogrammed both database from scratch. KSU is fully loaded 2 DTIB's and 2 LCOB's. Any info would be appreciated.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2004
Posts: 1,492
Member
|
|
Member
Joined: Oct 2004
Posts: 1,492 |
Have you connected a monitor to it to see what is going on?
I had this same problem happen a few times. 1.It was a very warm closet. Moved the system to a cooler location and never had a problem since.
2. Other thing is that the voicemail does a reboot in the middle of the night which causes them to not boot up properly sometimes. I've typically turned it off. By making the correct Registry setting. I believe it is called ProcessMon.Reset and it is set to ON by default.
|
|
|
|
|
Joined: Mar 2009
Posts: 37
Member
|
|
Member
Joined: Mar 2009
Posts: 37 |
Do have a monitor hooked up. The error message I am getting 08:18:54.438 1 dialvox:Signal Reinstated - Line is able to communicate with the KSU!
E 08:18:54.468 2 dialvox:Signal Reinstated - Line is able to communicate with the KSU!
E 08:18:54.498 3 dialvox:Signal Reinstated - Line is able to communicate with the KSU!
E 08:18:54.528 4 dialvox:Signal Reinstated - Line is able to communicate with the KSU!
E 08:18:54.558 5 dialvox:Signal Reinstated - Line is able to communicate with the KSU!
E 08:18:54.588 6 dialvox:Signal Reinstated - Line is able to communicate with the KSU!
E 08:18:54.618 7 dialvox:Signal Reinstated - Line is able to communicate with the KSU!
E 08:18:54.638 8 dialvox:Signal Reinstated - Line is able to communicate with the KSU!
C 09:06:02.845 2 Log: Start Call
The KSU etrace is also showing the unit is absent. Already turned off processmon.reset
|
|
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
Well it is obviously losing contact with the KSU. Is it in the slot nice and tight? I doubt it is that obvious. Could be a power problem. The card slot should be programmed as 17. I work out of Portsmouth if you need some on site help.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
|
Joined: Mar 2009
Posts: 183
Member
|
|
Member
Joined: Mar 2009
Posts: 183 |
Vodavi came out with a upgrade that would eliminate the clock issue between the KSU & VM. I had a couple of systems that the AA stopped & once I upgeaded to latest software for the VM problem solved.
|
|
|
|
|
Joined: Feb 2007
Posts: 903
Retired Moderator
|
|
Retired Moderator
Joined: Feb 2007
Posts: 903 |
I've had some early cabinets also that seem to have bus timing issues. This has affected both the inskin flash and HDD units. Replacing the units resolved the lockup/corruption issues.
--Bill.
|
|
|
|
|
Joined: Mar 2009
Posts: 37
Member
|
|
Member
Joined: Mar 2009
Posts: 37 |
Software version for Inskin HDD at 2.7 Stse is 1.02-afe2 are these the latest and greatest? At site today and unit is running clean from 6 A.M. to 12:00 A.M. had a hiccup at 3 A.M. continuing to monitor. The only changes made was grounding unused station pairs. Thank you all for the inputs if you have any more please continue to post.
|
|
|
|
|
Joined: Dec 2005
Posts: 651 Likes: 1
Member
|
|
Member
Joined: Dec 2005
Posts: 651 Likes: 1 |
I know this won't solve your problem but I have heard of grounding out unused ports on electronic stations before but I don't recall ever having to ground out a digital port. That may cause more problems than you already have. Others may do it but I do not recommend this. By the way, 1.02 is not the latest software for the sts you are working on, it is 1.04.
If you changed out the ksu and the vm already then it is obviously not a hardware problem. When you changed out the equipment did you upload the old programming with windba and inskins admin ? If so, you may want to default everything and hand peck it in from scratch to see if it is a database problem.
"I thought I was wrong once, but I was mistaken"
|
|
|
|
|
Joined: Mar 2009
Posts: 37
Member
|
|
Member
Joined: Mar 2009
Posts: 37 |
Programmed from scratch each unit and only grounded the unused pairs on a 4 pair cable.
|
|
|
|
|
Joined: Mar 2009
Posts: 183
Member
|
|
Member
Joined: Mar 2009
Posts: 183 |
adteldon is rite about version software. 1.02 had a lot of problems with vm. Upgrade to 1.04 should fix those problems.
|
|
|
|
Forums84
Topics94,520
Posts639,990
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Professor Shadow),
170
guests, and
37
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
