|
|
|
|
Joined: Jul 2009
Posts: 2
Member
|
OP
Member
Joined: Jul 2009
Posts: 2 |
Glad to find this forum, not much around for support on these phone systems, at least that I could find.
Here's the problem I have. We had to reset the phone system and clear out our settings. After restarting our pc was no longer able to connect to the phone system. When trying to use rs232 it comes back with a data communication error. I've also tried connecting via hyper terminal with no luck there either. Can anyone help me out? It's an XTS system if that helps. I can provide more details if needed. Thanks.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
Your XTS baud rate was most likely reset back to default. Make sure it matches up with your port settings on the pc and caller id in flash 56 has to be off.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
|
Joined: Jul 2009
Posts: 2
Member
|
|
OP
Member
Joined: Jul 2009
Posts: 2 |
Thanks for the reply. It actually had to do with the phone system itself. The battery was still holding some of the information because I didn't wait long enough to reset the system after I powered it down. Good old user user error.
|
|
|
|
Forums84
Topics94,287
Posts638,793
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (Bob3470, justbill),
98
guests, and
394
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
