|
|
|
|
Joined: Dec 2005
Posts: 19
Member
|
|
Member
Joined: Dec 2005
Posts: 19 |
I have a customer who has a pri installed for 3 years on an xts system. I am using the older pri card not the combo card. The local telco recently switched their circuit to a soft switch and now they are losing their outbound calling periodically. The pri worked flawlessly until this switch and the telco is (as usual) pointing their finger at us. the symptoms are dial 9 dial tone, dial number and silence. This will be like this for an hour or so and then outbound service will restore. They will call out fine for a few hours then same problem. I have not had any reports on incoming issues. This is also a fractional pri 14 channels voice. Any suggestions?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
It is a well known problem that the xts pri card, old or new will not be stable on a soft switch. I would look for a different carrier.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
Forums84
Topics94,514
Posts639,943
Members49,846
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
128
guests, and
36
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
