Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Joined: Mar 2010
Posts: 54
Member
OP Offline
Member
Joined: Mar 2010
Posts: 54
I have several SBX's currently installed sitting behind Edgemarc routers. They are being fed SIP trunks from Bandwidth.com and are all working great in/out bound calling for months now.

Problem: I am trying to do the same thing but with a differnt ISP.

I can make inbound calls all day long, but outbound not so much..

I did try isolating my SBX voip card, my laptop and the router port on a hub and running wireshark. On inbound calls I saw the invite to the end... but on an outbound call, Nothing...

Does this sound like hardware or SBX config.
Now remember, I've already setup several of these to do the same thing... Could it be a authorization with the ISP??
Anyone Help??


The Tech of Southwest Michigan
Stevensville, MI
269.277.8103

Quote
How do I get the blue smoke back into the system??
Atcom VoIP Demo
VoIP Demo
Joined: Jan 2008
Posts: 3,821
Retired Moderator
****
Offline
Retired Moderator
****
Joined: Jan 2008
Posts: 3,821
Seems like an ISP problem to me. I am a simple fellow, if something worked before and then it quits, I always ask what was changed between the time it worked last and when it quit working?


www.myrandomviews
"Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about"

Retired, taking photographs and hoping to fly one of my many kites.
Joined: Feb 2009
Posts: 3,136
Moderator-Vodavi, Vertical, XBlue
*****
Offline
Moderator-Vodavi, Vertical, XBlue
*****
Joined: Feb 2009
Posts: 3,136
Vertical has a list of about 6 tested SIP providers. Do you have that list and is your new provider on it? If not, Vertical support and support here may be limited.


- Dave S. -

You can never appease your ideologue opponents.

Joined: Mar 2010
Posts: 54
Member
OP Offline
Member
Joined: Mar 2010
Posts: 54
I have the list and no the ISP is not on it.
Vertical also said Bandwidth was an approved provider. Now bandwidth has changed there policyies and I have to find another vendor.
I have a good working relationship with a regional ISP and i though I'd give it a shot.


The Tech of Southwest Michigan
Stevensville, MI
269.277.8103

Quote
How do I get the blue smoke back into the system??
Joined: Jan 2005
Posts: 340
Member
*****
Offline
Member
*****
Joined: Jan 2005
Posts: 340
we use comm partners and have had no issues with sip, just a tip.

Joined: Mar 2010
Posts: 54
Member
OP Offline
Member
Joined: Mar 2010
Posts: 54
Good news for anyone in the Michigan area.

ACD.net is up and working SIP through and Edgemarc into and SBX, MP5000, WAVE, Partner ACS, Cisco, and get this.... a Merlin Magic if you can believe that.

All sorts of ways.. SIP to an Edgemarc and then PRI out of the Edgemarc into both Merlin and MP5000.
SIP into Edgemarc and FXS out into a Partner ACS and SBX.
SIP into Edgemarc and out to SBX via Ethernet (VoIP board)...

I'm in the process of documenting all the ways with screenshots of both Edgemarc settings and PBX pages.

If you want to try any of the senarios, feel free to email me.
[email protected]


The Tech of Southwest Michigan
Stevensville, MI
269.277.8103

Quote
How do I get the blue smoke back into the system??
Joined: Feb 2009
Posts: 3,136
Moderator-Vodavi, Vertical, XBlue
*****
Offline
Moderator-Vodavi, Vertical, XBlue
*****
Joined: Feb 2009
Posts: 3,136
Quote
I'm in the process of documenting
Your efforts are providing a valuable service. Thank you!


- Dave S. -

You can never appease your ideologue opponents.

Joined: Aug 2003
Posts: 5,149
Moderator-Vertical, Vodavi
*****
Offline
Moderator-Vertical, Vodavi
*****
Joined: Aug 2003
Posts: 5,149
Yes, I agree with Dave. Perhaps you could make create an informational post about your findings.

What is the benefit of using the Edgemarc verses just using a static IP for the SBX?

Joined: Feb 2005
Posts: 30
Member
Offline
Member
Joined: Feb 2005
Posts: 30
I'm trying to install a couple of SIP trunks from CommPartners on my in-house SBX and am having no luck. I am following the documentation from Vertical for CommPartners SIP trunks but it seems like somethings missing. I have these same trunks working on my Tadiran system in-house with no problems. Any ideas?

Joined: Aug 2003
Posts: 5,149
Moderator-Vertical, Vodavi
*****
Offline
Moderator-Vertical, Vodavi
*****
Joined: Aug 2003
Posts: 5,149
Do you have a static IP? On the VoIP card, do you have switches 1, 3, 4 on and 2 off?

Page 1 of 2 1 2

Moderated by  EV607797, JWRacedog, MnDave, nfcphoneman 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,881
Posts637,008
Members49,673
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
Today's Birthdays
ArturAIM, Crowtalks, gfcor, scottvin
Newest Members
APInc, m1cashman, jonnycom, XJR9000, BitBang
49,673 Registered Users
Top Posters(30 Days)
Toner 13
teleco 6
jsaad 6
dexman 5
Shahza 4
tim10 4
Who's Online Now
2 members (Touch Tone Tommy, BobRobert), 92 guests, and 21 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: Business Phone Systems | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2023
Powered by UBB.threads™ PHP Forum Software 7.7.5