|
|
Joined: May 2011
Posts: 3
Member
|
OP
Member
Joined: May 2011
Posts: 3 |
As mentioned, we have a Starplus 616 Flex that we use a number of cordless phones with as well as the stations. The manager's cordless phone has stopped ringing for no discernible reason. I have tried to remove the DND or Page Block features, but that does not work. I attached another phone to the port and that phone now no longer rings. I attached both of the phone to other ports and they now ring.
If anyone has ideas, I would appreciate it.
Thank you.
gambit
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2001
Posts: 3,268
Moderator-Allworx, Nisuko-Tie, Vodavi
|
|
Moderator-Allworx, Nisuko-Tie, Vodavi
Joined: Mar 2001
Posts: 3,268 |
"I attached both of the phone to other ports and they now ring." It sounds like you have two SLAs.
If both of the phones are in other ports and they work good---then it's not the phones. My first guess is that the first SLA is bad or the jumpers are not punched down right--perhaps they need to be re-punched. Make sure all connections are OK. Go step by step.
Are you getting dial tone on all the SLA ports? Can you intercom using the phones on all SLA ports??
|
|
|
|
|
Joined: May 2011
Posts: 3
Member
|
|
OP
Member
Joined: May 2011
Posts: 3 |
I get a dial tone on the port in question and I can use the intercom, and i will try to check the SLA.
Thank you
gambit
|
|
|
|
|
Joined: May 2011
Posts: 3
Member
|
|
OP
Member
Joined: May 2011
Posts: 3 |
Is there any way to reset a station's properties?
|
|
|
|
Forums84
Topics93,968
Posts637,416
Members49,704
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
