|
|
Joined: Aug 2005
Posts: 391
Member
|
|
Member
Joined: Aug 2005
Posts: 391 |
Why can't I upload my button mappings via windba. It takes the upload but doesn't change the buttons. I even defaulted the system by switching 8 to on. Buttons still stay the same won't change
The Advance Noobie!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2005
Posts: 15,395 Likes: 17
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
|
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,395 Likes: 17 |
It depends upon what version of software you had and what version you are uploading into. Also, each new software version pretty much required an updated version of WinDBA. Button mapping and flexible station numbering are the two areas that come to mind that get skipped when incompatible versions are used.
Ed Vaughn, MBSWWYPBX
|
|
|
|
|
Joined: Aug 2005
Posts: 391
Member
|
|
Member
Joined: Aug 2005
Posts: 391 |
On the MPB I have 4.16 PO2. Would that be my software version? Also on ccc.vertical I can't find any windba downloads. Also tried to open a support ticket to see if there is a download link and i get a microsoft.net aspx error on their website.
The Advance Noobie!
|
|
|
|
|
Joined: Aug 2005
Posts: 391
Member
|
|
Member
Joined: Aug 2005
Posts: 391 |
and also why would it not clear the button mapping on an initialize?
The Advance Noobie!
|
|
|
|
|
Joined: Jan 2005
Posts: 15,395 Likes: 17
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
|
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,395 Likes: 17 |
You should dial 605 from any display phone to confirm the software level. What is labeled on the chips isn't always accurate.
Ed Vaughn, MBSWWYPBX
|
|
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
Triad windba was notorius for not uploading (or downloading) button mapping. Also the latest version of Windba for the triad is the first version of windba for the XTS. Actually it is the version that has 1.xxx, 2.0 and 2.xxx all packaged together.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
|
Joined: Aug 2005
Posts: 391
Member
|
|
Member
Joined: Aug 2005
Posts: 391 |
So how do we change the buttons? I also tried through hyper terminal and it wouldn't go past the password. I put the password in then it wouldn't go any further. I also booted up with hyperterminal and I get
RAM block 0, test, passed
RAM block 1, test, passed
RAM block 2, test, failed
RAM block 3, test, failed
Does that mean we have a bad processor?
WindDBA tells me this
Feature Package II (for ksu 2.0,2.1)
Feature Package III (for ksu 3.07,3.09)
If you select II – then 2.0D is version
If you select III – Then 3.0C is version
The Advance Noobie!
|
|
|
|
|
Joined: Jan 2008
Posts: 3,821
Retired Moderator
|
|
Retired Moderator
Joined: Jan 2008
Posts: 3,821 |
Nope, just means you don't have memory expansion installed. The buttons can be changed through phone admin programming. You will need a manual to do this or you will need onsite support.
www.myrandomviews "Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about" Retired, taking photographs and hoping to fly one of my many kites.
|
|
|
|
|
Joined: Aug 2005
Posts: 391
Member
|
|
Member
Joined: Aug 2005
Posts: 391 |
OK thanks I did an sts via the phone can't be too different
The Advance Noobie!
|
|
|
|
|
Joined: Aug 2005
Posts: 391
Member
|
|
Member
Joined: Aug 2005
Posts: 391 |
I updated windba and it took the button mappings upload
The Advance Noobie!
|
|
|
|
Forums84
Topics94,512
Posts639,934
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
272
guests, and
27
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
