sundance-communications.com/forum Forums Other TDM Phone Systems Other Telephones & Systems Trillium Panther II 1032

Does anyone have the pinout and programing saved electronically? I have had this system hanging around for quite some time and have misplaced the manual. Any help would be greatly appreciated.
Thanks

Try the manuals link above, I know All Types has that manual...on-line.

Good luck and welcome to the forum.

Thanks, but I can't see spending the money for the manual if the system doesn't work.
I just need to know the pinout of the incoming lines at the 66 block to the amphenol connector so I can hook up a deskset to check for a dial tone. If I find that it is a working system I will then purchase the manuals for it.

Just take your amphenol connector and plug it into the C.O. connector on the right side of the KSU and then put dial tone on the first pair. That should give you dial tone on the first port and it should be line 1. The 2nd pair should give you line 2 etc., etc.

Or are you asking about intercom tone?? For that, the Voice TR is on the first pair and the Data TR is on the 2nd pair.---jacked just like a Partner system. 8 Stations to a block. Put it in the first amphenol connector on the left side for stations 10-17.

Do you have a Feature module with that system??
Do you have a Panther II display set for the first port?
Good Luck.