|
|
|
|
Joined: Jun 2007
Posts: 122
Member
|
OP
Member
Joined: Jun 2007
Posts: 122 |
So the power went out at one of my remote offices toward the end of the day yesterday and they were not able to put it into night mode before they left...it came back up as soon as they left of course...this is how I found out that whoever programmed the system did not set up to do anything other than ring during the day....if someone forgets to put into night mode, the line just rings off the wall....
question, is there a way within the phone that the main line points to, to modify the normal scenario to say ring 5 times and then go into the aa? Or does this have to be programmed via serial port?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2007
Posts: 154
Member
|
|
Member
Joined: Jan 2007
Posts: 154 |
it would need to be set via the serial port, but what we do is DIL the lines to a PHTM then CFWD NA the PHTM to vmail. (make sure you set the vmail to alias or ignore the integration of the PHTM), then you simply ring assign the trunks to the appropriate phones. But when the call goes unanswered for the CFWD NA TIMER it forwards to the AA.
This will still allow the Caller ID work.
|
|
|
|
Forums84
Topics94,287
Posts638,793
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
135
guests, and
410
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
