|
|
|
|
Joined: Nov 2001
Posts: 487 Likes: 1
Member
|
|
Member
Joined: Nov 2001
Posts: 487 Likes: 1 |
I've been working my way thru this bear without a manual. Can you help me with a couple of programming commands? From the command line how do you find the port # of an extension that I'm looking for? Is there a command to find all the extensions a trunk appears on and how do you save the changes that were made.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2004
Posts: 880 Likes: 1
Member
|
|
Member
Joined: Mar 2004
Posts: 880 Likes: 1 |
So long as the extension is the prime extension on the port, just type E(extension number) from the main command prompt. For example > E100
Or to print all codes, from the main command prompt DGN CODE P will print all codes in the system (early versions of the Millennium did not have this function).
DGN CHAIN L(port number) B(button number) will result in a printout of all stations that share that same button programming.
COPY ALL Y will save programming changes. If you don't copy all, then you'll lose your changes next time the system reboots.
|
|
|
|
|
Joined: Nov 2001
Posts: 487 Likes: 1
Member
|
|
Member
Joined: Nov 2001
Posts: 487 Likes: 1 |
Thanks for the info. I did find out, the hard way, after a reset that all changes need to be saved.
|
|
|
|
Forums84
Topics94,522
Posts639,996
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
288
guests, and
43
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
