sundance-communications.com Forums Telephony Discussion Phone & VoIP Systems NEC Telephones & Systems NEC Electra Professional 120 Level 2

I have just received a request to help a firm (who lost ALL manuals) reconfigure and setup this phone system.

Is there a PC based user interface for this KSU or will I have to program and configure completely from a station?

Also is there a default installation/setup password ??

All responses will be appreciated.

email me


the 48/192 manual. it's pretty close. it will have some features that weren't around in the level 2 days.

as far as a program for the pc.......you need a mifm card in the system & the sat software to do it. i find it's alot easier to do it via a phone then just back it up via a pc (if i have a mifm)

[This message has been edited by chrislebeck (edited July 30, 2004).]

We have an NEC Profressional 120 also.
I'm trying to program this via a station and Im not having any luck -- the manual i have doesn't have instructions for this.

Where do I get the PC software to program this thing?

not really sure where you can get the sat software for the level2...........

phone programming can only be done on port 1 or 2 (usually ext 100 & 101)

to get into programming it is the same as the elite 48/192/ipk/level1/level 2/120

I've looked everywhere I can find, where are the manuals for the NEC Electra Professional CSU? Any help would be appreciated....

Click on manuals above, they should have them.

------------------
Bound to cover,
just a little more ground.