sundance-communications.com/forum Forums TDM Business Telephone Systems NEC Telephones & Systems NEC Electra Elite 192 help

When it comes to NEC equipment, I'm somewhat lost. However I under stand basic phones setup. I a have a customer that I do some freebe work for from time to time, Thay are a non profit. thay have an Elite 192 system with 16 stations and voice mail, thay system is maxed out. I have what I think is an 8 port station card from another system. It reads ESI(8)-U10 ETU Lot-193A, Is this a plug and play card for 8 more ports. Thanks for the reply.

ESI=Electronic Station Interface

The Electronic Station Interface ETU contains eight circuits. Each circut can support one Digital Multiline Display Board, Attendant Add-On Console, Single Line Telephone adapter, Dterm Cordless Terminal, Dterm Extender or Electra Mail CTI port.

------------------
NEC Unified Solutions / Voice Mail and Unified Messaging | Active Voice, LLC

well you can plug it in hot. but it will need to be programmed up in order for it to work.

7-1 for card type

7-2 phone type (no need to change this if using digital phones. only if you plan on adding a dss or something like that)

4-10 to assign station numbers to the new ports

4-12 to program the buttons on those ports

4-01/02 day/night ringing if needed

just a whole bunch of stuff

Thanks for the Info. This will get them started.