|
|
|
|
Joined: Mar 2005
Posts: 61
Member
|
OP
Member
Joined: Mar 2005
Posts: 61 |
I have recently been asked to take over a fairly new electra elite 48. im looking for which manual would cover it.it has (1)b48-u10ksu with a co18-u10 inslot s3,an identifiable card in s6 that has a flash card mounted on it, and last a r-u1 etu inslot s7. Any direction he list can give me to get up on board quickly would be appreciated. My customer needs sveral more extensions added and some others reprogrammed. thanks in advance
------------------
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Nov 2003
Posts: 1,313
Member
|
|
Member
Joined: Nov 2003
Posts: 1,313 |
you have the esi8 (8 digital station ports) in the built in slot #1
a coi8 (8 loop start trunks) in slot #3
some sort of voice mail (i'm guessing a fms2/4 or maybe a cms2/4) in slot #6
slot #7 is a mystery to me. maybe an ecr card? if so that is a relay/page zone type card
========================================
if they already have 8 phones then you'll need another esi8
[This message has been edited by chrislebeck (edited March 03, 2005).]
|
|
|
|
|
Joined: Mar 2005
Posts: 61
Member
|
|
OP
Member
Joined: Mar 2005
Posts: 61 |
Chris,thanks for the response. I do recall that they have paging so that would explain the relay board in s7.
I have noticed that there are may be different versions of processors how do i verify the software level so i can use the right manual or is it not an issue?
------------------
|
|
|
|
|
Joined: Nov 2003
Posts: 1,313
Member
|
|
Member
Joined: Nov 2003
Posts: 1,313 |
actually 1 zone external paging is built into the cabinet. if you needed up to 3 external zones or ring over page or music over page or door relays or something like that THEN you'd use an ecr card. the card labels are on the front of the card edge. look for esi8-u10 type names.
go to any display phone and do a feature 3. that will tell you the software version of the cpu.
manual versions can be different as long as they are at least the same or above.
|
|
|
|
|
Joined: Nov 2003
Posts: 1,313
Member
|
|
Member
Joined: Nov 2003
Posts: 1,313 |
as a side note...........on the 48 only certain slots pin out to the amp cables.
ie.slot #7 does not pin out. but slots 1,3-6 do
|
|
|
|
Forums84
Topics94,284
Posts638,772
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
126
guests, and
322
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
