|
|
|
|
Joined: Jul 2005
Posts: 210
Member
|
|
Member
Joined: Jul 2005
Posts: 210 |
System is an IPS 2000 with 3300 R8.
You call an outside number and after 6 seconds, the number you dialed disappears from your IP phone's display, and you see the date/time and the duration of the call. I don't seem to find a way to bring the number I dialed back to the display.
I know CM08>120 and CM08>121 has something to do with the duration of it being 6 or 10 seconds, but I want it shown for the entire duration of the call. Is there a command for that? Any ideas?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2005
Posts: 2,125
Member
|
|
Member
Joined: Aug 2005
Posts: 2,125 |
You want:
08>121>1 (CID display for duration of call), which depends on
08>255>1 (CID display allowed)
You can ignore 08>120 (6 or 10 seconds) because you have 08>121>1 set to ignore 08>120>
But because NEC programming sometimes depends on things that seem unrelated (see also, "voodoo") you may want to try both settings for 08>120 if it doesn't work after setting 08>121 and 08>255.
There's also a key setting for Call Display (Not sure if that's what they call it) but I wasn't able to find it in my Command Manual just now. You press the button and see Caller ID at any time during the call.
Hope that helps.
|
|
|
|
|
Joined: Mar 2005
Posts: 42
Member
|
|
Member
Joined: Mar 2005
Posts: 42 |
Try using the F5010 key to make the ID info reappear for 6 more secondes.
Mextera
Hot Rod
|
|
|
|
Forums84
Topics94,526
Posts640,016
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Toner),
253
guests, and
48
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
