|
|
|
|
Joined: Feb 2005
Posts: 101
retired
|
|
retired
Joined: Feb 2005
Posts: 101 |
I have an opportunity to pick up a customer with
a Nec electra elite 48 system and I have a tech I think can take care of it. I found the system manuals through this site and now I need to know what software, if any, I need to use in a lap top for programming. Will Hyper-term or a vt-100
emulator work or do we need some special NEC software loaded up.
"Everyone needs something to believe in. I believe I'll have another beer"
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2005
Posts: 10
Member
|
|
Member
Joined: Oct 2005
Posts: 10 |
You need special NEC software. The program is called SAT and it is proprietary. The version of SAT that you need is dependent on what software level your 48 is at. Also you will need a MIF-M card to allow pc programming, otherwise you have to do it through the telephone set.
|
|
|
|
|
Joined: Feb 2005
Posts: 101
retired
|
|
retired
Joined: Feb 2005
Posts: 101 |
Thanks for the info, my tech will have to do it the old fashioned way.
"Everyone needs something to believe in. I believe I'll have another beer"
|
|
|
|
|
Joined: Jan 2006
Posts: 1
Member
|
|
Member
Joined: Jan 2006
Posts: 1 |
Can you tell me where to get this software? Also, how can I tell if I have the appropriate card. I have done some programming thru the terminal, but I was told by the previous owner of the system that it was programmed before by a PC. Maybe they meant the voice mail only?
|
|
|
|
|
Joined: Feb 2006
Posts: 3
Member
|
|
Member
Joined: Feb 2006
Posts: 3 |
I'd also like to find the SAT software for our Elite 48. is it the kind of think I'd have to get from NEC? I don't think our dealer's in business anymore, and they weren't particularly helpful to begin with.
The phone says software version 665 Q30931, if that means anything. the software may have been upgraded in september 2003, or it might be original from 2000.
there's a little daughter card on the unit with a serial port and a phone port; I presume the serial port is what allows PC access
any info you might have would be helpful.. thanks!
|
|
|
|
|
Joined: Dec 2005
Posts: 170
Member
|
|
Member
Joined: Dec 2005
Posts: 170 |
to skippy flipjack:
that is the vmail u are looking at, if this is a elite 48 the 25pin connector is on the backplane, if this is an elite 192 or the ipk the connectors ar on the side
|
|
|
|
|
Joined: Dec 2005
Posts: 170
Member
|
|
Member
Joined: Dec 2005
Posts: 170 |
oh and u will need an mifm card
|
|
|
|
|
Joined: Feb 2006
Posts: 3
Member
|
|
Member
Joined: Feb 2006
Posts: 3 |
ahh.. that *is* what I was looking for. I misread the original post. I want to be able to do config of the voicemail system, rather than unit programming. can I do this via hyperterm or other term emulation program, and do I use the serial port for this? thanks
|
|
|
|
|
Joined: Dec 2005
Posts: 170
Member
|
|
Member
Joined: Dec 2005
Posts: 170 |
u will need the cosessions software, and u will need a null modem cable. the baud rate is 19200, once u get the software
|
|
|
|
|
Joined: Feb 2006
Posts: 3
Member
|
|
Member
Joined: Feb 2006
Posts: 3 |
does anyone have a copy of the cosessions software? ours is long gone.. thanks
|
|
|
|
Forums84
Topics94,511
Posts639,924
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
358
guests, and
42
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
