|
Joined: Dec 2005
Posts: 170
Member
|
Member
Joined: Dec 2005
Posts: 170 |
do u have piano key #3 on?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jul 2005
Posts: 32
Member
|
OP
Member
Joined: Jul 2005
Posts: 32 |
I pulled out the flash and defrag'd it in a pc... I don't get any prompt to press 2... I'm able to access the vm only in hyperterminal and all it does, is loading the bicom driver(ok) and then runs acd.exe which actually displays these errors and goes back to the dos prompt. Also, I suspect that some of the files are deleted form the hd... I don't see any subdirectories named "vm" And, lastly, the key 3 was "on" and 4 was "on" too.
|
|
|
|
Joined: Dec 2005
Posts: 170
Member
|
Member
Joined: Dec 2005
Posts: 170 |
key #3 is for remote maintenance, for a modem, turn key 3 off and reboot card. leave key 4 on. u should be able to get in with cosessions. the default baud rate is 19200. it will come up in the utility menu and u can run a database check from there.
|
|
|
|
Joined: Jul 2005
Posts: 32
Member
|
OP
Member
Joined: Jul 2005
Posts: 32 |
I did start the vm with 4 "on" and 3 "off" but results are the same, the dos prompt and vt100 after the acd.exe ends it's execution with errors...
|
|
|
|
Joined: Jul 2005
Posts: 1,333
Member
|
Member
Joined: Jul 2005
Posts: 1,333 |
ACD.EXE??
Your not trying to access an ACD Plus card are you??
Regards,
Paul W Now back to a 0 day week. Love these 7 day weekends.
|
|
|
|
Joined: Jul 2005
Posts: 32
Member
|
OP
Member
Joined: Jul 2005
Posts: 32 |
Paul, Huh? That initially made me suspect that the flash card installed on the board is not the correct one for the vm. The board itself is FMS(8)-U10 but the flash card is 48MB and has a sticker "software rev v1.80" and "Datalight". Please let me know if you have any additional info on this issue.
|
|
|
|
Joined: Jul 2005
Posts: 32
Member
|
OP
Member
Joined: Jul 2005
Posts: 32 |
Paul, Thank you for pointing me to the right direction! The acd plus software installed on the flash. Now it make sence to me why I was getting "BLF test". I should have configured it as "ACD" in 7-1, not as "VMS"...
Now, the question is, is it possible to obtain a flash with voicemail?
|
|
|
|
Joined: Jul 2005
Posts: 1,333
Member
|
Member
Joined: Jul 2005
Posts: 1,333 |
Hi Dennis.
Glade it was resolved.
It should be posible to buy one from NEC. Don't know what the pricing would be though from memory the card hardware is the same . If it is one of the latest cards it will take a 8 port flash rom however not all the older FMS mails would take 8 ports only 4 ports.
Regards,
Paul W Now back to a 0 day week. Love these 7 day weekends.
|
|
|
Forums84
Topics94,262
Posts638,696
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Toner),
103
guests, and
241
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|