|
|
|
|
Joined: Mar 2006
Posts: 12
Member
|
|
Member
Joined: Mar 2006
Posts: 12 |
I updated our VMS card from 6.65 Q30931 to 6.68 Q00631 and now Cosession will not connect! The update appeared to go flawlessly- as far as I could tell. The null-modem cable was not removed after the update (cable has not been disturbed or changed) and the serial setup I was using was 8N1, 19,200 with Hardware Flow Control.
Any Suggestions?
Thanks,
Travis-
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2006
Posts: 12
Member
|
|
Member
Joined: Mar 2006
Posts: 12 |
OK, apparently something slightly changed with how the batch files check the jumpers between the two versions. I have always had jumper 1 on. (the manual states that enables COM1) however the batch files seem to be using it to determine whether you're going into one of the maintenance modes. Turning it off appears to be what solved the problem. There are no password changes or baud rate/comm changes between these two versions.
Travis-
|
|
|
|
Forums84
Topics94,526
Posts640,017
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
384
guests, and
60
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
