sundance-communications.com/forum Forums TDM Business Telephone Systems NEC Telephones & Systems Electra Professional Level II

Print Thread

Rate Thread

Page 1 of 2

Electra Professional Level II #231196 07/17/06 10:12 AM
Joined: Jul 2004 Posts: 279 Conyers,Ga dell Member
dell Member Joined: Jul 2004 Posts: 279 Conyers,Ga	anyone had a Electra Pro II have ext showing different ext numbers after system shut down ? If you say you don't know you will get more respect.

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: Electra Professional Level II #231197 07/17/06 11:39 AM
Joined: Apr 2005 Posts: 2,526 Likes: 4 St. Louis, Mo 63025 dans Member
dans Member Joined: Apr 2005 Posts: 2,526 Likes: 4 St. Louis, Mo 63025	Only if the numbering plan had been changed, system lost power and the memory battery was dead. System would reboot as default. We get old too soon, smart too late

Re: Electra Professional Level II #231198 07/17/06 12:19 PM
Joined: Jul 2004 Posts: 279 Conyers,Ga dell Member
dell Member Joined: Jul 2004 Posts: 279 Conyers,Ga	If the system reboot default will the T-1 still work because it is up,I am going to check card assignment. If you say you don't know you will get more respect.

Re: Electra Professional Level II #231199 07/20/06 06:41 AM
Joined: Nov 2004 Posts: 15 cincinnati,ohio ur8up Member
ur8up Member Joined: Nov 2004 Posts: 15 cincinnati,ohio	Is that memory battery a common pc battery?

Re: Electra Professional Level II #231200 07/20/06 12:16 PM
Joined: Dec 2005 Posts: 170 tyler, tx bigc3310 Member
bigc3310 Member Joined: Dec 2005 Posts: 170 tyler, tx	it should be a 3.6 volt nicad battery if i am not mistaken. it is on the CPU.

Re: Electra Professional Level II #231201 07/21/06 12:14 AM
Joined: Nov 2004 Posts: 15 cincinnati,ohio ur8up Member
ur8up Member Joined: Nov 2004 Posts: 15 cincinnati,ohio	Is it soldered in or can it be replaced fairly easy?

Re: Electra Professional Level II #231202 07/21/06 01:23 AM
Joined: Jul 2006 Posts: 171 Virginia smoom Member
smoom Member Joined: Jul 2006 Posts: 171 Virginia	It is soldered on, it can be replaced but usually takes 30-45 minutes to take the board out de-solder the existing battery and install the new battery.

Re: Electra Professional Level II #231203 07/21/06 02:44 AM
Joined: Nov 2004 Posts: 15 cincinnati,ohio ur8up Member
ur8up Member Joined: Nov 2004 Posts: 15 cincinnati,ohio	Where can I get one?

Re: Electra Professional Level II #231204 07/21/06 02:48 AM
Joined: Dec 2005 Posts: 170 tyler, tx bigc3310 Member
bigc3310 Member Joined: Dec 2005 Posts: 170 tyler, tx	mike sandman www.sandman.com

Re: Electra Professional Level II #231205 07/21/06 03:08 AM
Joined: Nov 2004 Posts: 15 cincinnati,ohio ur8up Member
ur8up Member Joined: Nov 2004 Posts: 15 cincinnati,ohio	Got a part#