|
|
|
|
Joined: Jul 2005
Posts: 210
Member
|
OP
Member
Joined: Jul 2005
Posts: 210 |
I just got an old IVS and trying to set it up. I already wiped all previous programming from it, and I'm now ready to program the whole thing from scratch. I hate the idea of doing it in CAT mode, but so far, I couldn't get my computer to talk to it.
I have a serial cable that nicely plugs into the PN-CP03 processor card, and I have Matworx installed on my computer which I have been using to maintain an IPS 2000.
But it won't connect to this IVS... I tried different baud rates, tried both ports on the proc-card, but no luck.
Any advices?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Feb 2006
Posts: 444
Member
|
|
Member
Joined: Feb 2006
Posts: 444 |
check sw2 #4, must be off for rs-232 connection.
Scott.
|
|
|
|
|
Joined: May 2006
Posts: 13
Member
|
|
Member
Joined: May 2006
Posts: 13 |
You should be able to talk to it using that cable and hyperterminal.
set the sense switch on the cpu to 3 and press the reset button , that will take the system off line and fix the speed to 1200. Then you can use cm 4008>0 to set the speed as required ( 4=9600).
set the sense back to 0 and you should be able to talk to it using hyperterminal at 9600
|
|
|
|
|
Joined: Jul 2005
Posts: 210
Member
|
|
OP
Member
Joined: Jul 2005
Posts: 210 |
Thanks for the help. I figured it out, and programmed the whole system.
|
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
165
guests, and
339
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
