|
|
Joined: May 2005
Posts: 39
Member
|
Member
Joined: May 2005
Posts: 39 |
I would appreciate some guidance in programing a CNF(8)-U10 in an IPK with 4.6 Firmware. According to the manual the CNF installs as an SLI(8); however, you can select either SLI(8) or CNF(8)in the SAT program. Which is best? What additional programing is required? SAT doesn't have a Wizzard for the CNF. Is the procedure in setting up a conference any different than the base conference capability of the IPK?
Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Nov 2003
Posts: 1,313
Member
|
Member
Joined: Nov 2003
Posts: 1,313 |
on the very few that i have done, which is done via a phone, i set it for esi8.
there is a little sheet you can get from nec's web site (if you are a certified tech) that has the programming steps. should have also come with the card if i remember right.
|
|
|
|
Joined: Jul 2005
Posts: 1,336
Member
|
Member
Joined: Jul 2005
Posts: 1,336 |
I've always set them up as an SLi8 with a circular hunt pattern. Main problem I've had is the low level of system prompts even after the cust has re-recorded them..
Regards,
Paul W Now back to a 0 day week. Love these 7 day weekends.
|
|
|
|
Joined: Jul 2006
Posts: 731
Member
|
Member
Joined: Jul 2006
Posts: 731 |
The CNF-8 must be set as a SLI-8, with mem blocks 4-31 for voice mail disconnect & 4-14 & 15 for hunt group asignment.
|
|
|
|
Joined: Nov 2003
Posts: 1,313
Member
|
Member
Joined: Nov 2003
Posts: 1,313 |
paulw & ipk2 are right......sli8 NOT esi8.
1>Assign the CNF(8)-10 ETU as SLI(8)-U10 ETU using Memory Block 7-1 (Card Interface Slot Assignment).
2>All ports that are set to the same conference group should be set to the same Master Hunt Group using Memory Blocks 4-14 (Intercom Master Hunt Number Selection) and 4-15 (Intercom Master Hunt Number Forward Assignment).
3>When CNF is set for two, 4-party conferences, ports 1~4 should be set to the same Master Hunt Group, and ports 5~8 should be set to a different Master Hunt Group.
4>DIT assignment may be set to Master Hunt Group using Memory Blocks 3-42 (DIT Assignment) for day or 3-43 (ANA Assignment) for night.
5>All ports should be assigned as a Voice Mail Port by using Memory Block 4-35 (Voice Mail/SLT Selection) to insure proper disconnect signals.
|
|
|
Forums84
Topics94,512
Posts639,933
Members49,844
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
122
guests, and
40
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|