|
|
Joined: Jan 2006
Posts: 18
Member
|
|
Member
Joined: Jan 2006
Posts: 18 |
In a 2000IVS, is a CP03 compatible with PRI (24DTA-A and SC01) without a key-keeper or 64 port sys software? :confused: ================================================== I made the mistake of running a "C-Load" on a CP03 in a 1000IVS and found out that the 1000 is not compatible with PRI without the keys.  Any help offered would be greatly appreciated.
wes
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
No, you need the 64 port software to have a PRI (it allows 5), not really documented. & the CP03 would have to be R2200. Hope this helps.
|
|
|
|
|
Joined: Jan 2007
Posts: 5
Member
|
|
Member
Joined: Jan 2007
Posts: 5 |
Umm... sorry..
No such thing as a Key Keeper or R2200 on the CP03.
The highest software released was 1920R2("A" disk)/1930R2("B" disk). All CP03s had the ability to do PRI as long as the "A" disk was loaded and was successfuly registered.
Note: Must have at least 1820 software to run NI2 protocol.
|
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
I was confusing the CP03 w/ the CP14.
|
|
|
|
|
Joined: Jan 2007
Posts: 5
Member
|
|
Member
Joined: Jan 2007
Posts: 5 |
|
|
|
|
|
Joined: Oct 2011
Posts: 15
Member
|
|
Member
Joined: Oct 2011
Posts: 15 |
On this topic i have a 2000 with 1800 via F82>
the customer has last the disks. Is there a command that will display 1820 or 1830?
F63>05fff67 comes back with a data error.
The customer ordered PRI service before we knew what the system would support. Currently it has a T1 installed.
Thanks
|
|
|
|
|
Joined: Aug 2005
Posts: 2,125
Member
|
|
Member
Joined: Aug 2005
Posts: 2,125 |
The last IVS that I had to check software on, I had to call NTAC and give them remote access, if I recall. And I'm not sure that NTAC still supports IVS. I think that the F85 / F63 commands were in IVS2 and IPS releases only.
|
|
|
|
|
Joined: Aug 2005
Posts: 2,125
Member
|
|
Member
Joined: Aug 2005
Posts: 2,125 |
Given the age of an IVS, I might suggest an upgrade.
|
|
|
|
Forums84
Topics94,514
Posts639,943
Members49,846
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
107
guests, and
35
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
